ECE Overview About HOD's Message Faculty Infrastructure Achievements Events Publications Consultancy Industry Connect Department FAQ's
ECE Overview About HOD's Message Faculty Infrastructure Achievements Events Magazine Publications Consultancy Industry Connect Department FAQ's

Course Overview


The Department of Electronics & Communication Engineering at ABES Engineering College Ghaziabad was established in the year 2000. The department runs a four-year full-time B.Tech program and a two-year full-time M.Tech program in Electronics & Communication Engineering with a total intake of 180 students in B.Tech and 6 students in M.Tech. The B.Tech program is accredited by the National Board of Accreditation (NBA). The department has well-qualified, experienced, and dynamic faculty members.

The Department has well-equipped labs with the necessary hardware and software to meet the curriculum and industry requirements. We have state of art Project Lab and CoE’s to harness the creative and innovative aspiring minds to put their imagination into reality.

The Department has to develop high-quality, technically compliant students who become confident in the Electronics and Communication engineering field with a focus on research and socially responsible. The main objective is to enhance the student employability skills through in-house training, workshops, guest lectures from industry & projects based on student interest.

For the holistic development of students, we are nourishing our students in such a way that they can accept the technical challenges focused by the outside world. The department provides concept-based learning, applied research, consultancy from the corporate, patents, and training in the field of Microelectronics Domain (SOC based software field), Application Domain (Embedded and IoT), Signal Processing using NI-LabVIEW, RF & Microwave Devices and Industrial Automation using PLC, HMI & Drives.

Students in the Department undergo In-house industrial training to bridge the gap between Industry and Academia. Department of ECE has recently signed MoUs with JKSD Infotech Pvt. Ltd. NEXTUP Robotics Pvt. Ltd. FITT i-TTO IIT Delhi, EICT IIT Guwahati, Uniconverge Technologies Pvt. Ltd. for industry-based consultancy and projects.

The Department provides guidance to students for developing products based on ideas received from industries and create an in-house ecosystem, encouraging industrial exposure to student's product development at the college level to make them industry ready and globally competent.

ECE Department has fetched research and consultancy projects funded by various government and non-government funding agencies, with an aim to offer our students, the opportunity to work on real-time problems & projects.

Why us


Our B.Tech. Program is accredited by NBA (National Board Accreditation), result-wise ,we are at top position among the leading Engineering colleges in AKTU.

We offer 360° nurturing for overall grooming of our students and to develop global competency through: One-to-One mapping, domain allocation, direct academic monitoring by Program Leaders, Mentor-Mentee Program, buddy program, Concept Booster Classes, Training Trackers and In-house trainings.

Placement Statistics for the last completed Academic Year exhibits the Highest Salary Package of INR 26 LPA and Placement Percentage of 100.

Students are motivated to publish their project research work in UGC/ SCOPUS and journals of high repute, potential projects are stimulated for patent filling resulting in high number of publications and patents. Good number of Startups has been initiated by our students.

We have 11 State-Of-The-Art Labs, 5 Centres of Excellence(COE) and 4 Advanced-Labs for R&D work. All COEs and Advanced Labs are tied up with reputed industries.

Our COEs are Corporate training centres for renowned Electronics industries like Truechip, Elbrus Labs, Optimum Viking, System Infra Solutions and AEAB Automation Pvt Ltd.

We have 12 industrial MOUs with leading electronics companies to bridge the gap between industry and academia.

On the basis of inputs from Industries, we are running 6 In-house training programs to provide complete exposure of the Industries in the field of Microelectronics (SOC), Signal Processing, IOT & Robotics(Embedded Systems), Automation(PLC & SCADA) and Communication (Satcom,SMT,MATLAB, Antenna &Microwave design)

MOUs


Vision


To contribute to India and the world through excellence in education and research in the field of Electronics & Communication Engineering and serve as valuable resource for the industry and the society at large.

Mission


To create an environment, which shall encourage the development of innovative professionals and researchers in the cutting-edge technologies of Electronics & Communication Engineering, in line with industry requirements and to impart professional ethics with positive attitude.

Programme Educational Objectives (PEOs)

1
To impart the students sound technical knowledge and skills in the core & related science & mathematics subjects of Electronics & Communication Engineering so that they graduate as professionally competent engineers, capable of applying & implementing the acquired skills.
2
To inculcate in students a desire to be innovative and passionate about excelling in the field of Electronics & Communication Engineering.
3
To develop managerial and soft skills so that they become confident and competent enough to take challenging responsibilities & leadership roles in the industry & corporate.
4
To equip them with solid foundation in ECE engineering so that they can pursue higher studies in the subject.
5
To groom the students to acquire professional ethics, moral values and devotion to duty so that they prove to be worthy citizen of India with international outlook.

Program Outcomes (POs)

1
Engineering knowledge: Apply the knowledge of mathematics, science, engineering fundamentals, and an engineering specialization to the solution of complex engineering problems.
2
Problem analysis: Identify, formulate, review research literature, and analyze complex engineering problems reaching substantiated conclusions using first principles of mathematics, natural sciences, and engineering sciences.
3
Design/development of solutions: Design solutions for complex engineering problems and design system components or processes that meet the specified needs with appropriate consideration for public health and safety, and cultural, societal, and environmental considerations.
4
Conduct investigations of complex problems: Use research-based knowledge and research methods including design of experiments, analysis and interpretation of data, and synthesis of the information to provide valid conclusions.
5
Modern tool usage: Create, select, and apply appropriate techniques, resources, and modern engineering and IT tools including prediction and modelling to complex engineering activities with an understanding of the limitations.
6
The engineer and society: Apply reasoning informed by contextual knowledge to assess societal, health, safety, legal, and cultural issues and the consequent responsibilities relevant to professional engineering practice.
7
Environment and sustainability: Understand the impact of professional engineering solutions in societal and environmental contexts, and demonstrate the knowledge of, and need for sustainable development.
8
Ethics: Apply ethical principles and commit to professional ethics and responsibilities and norms of engineering practice.
9
Individual and team work: Function effectively as an individual, and as a member or leader in diverse teams, and in multidisciplinary settings.
10
Communication: Communicate effectively on complex engineering activities with the engineering community and with society at large, such as, being able to comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions.
11
Project management and finance: Demonstrate knowledge and understanding of engineering and management principles and apply these to one’s own work, as a member and leader in a team, to manage projects and in multidisciplinary environments.
12
Life-long learning: Recognize the need for, and have the preparation and ability to engage in independent and life-long learning in the broadest context of technological change.

Program Specific Outcomes (PSOs) relevant to the Course

1
An ability to design and analyze the concepts and applications in the field of communication/ networking, signal processing, embedded systems and semiconductor technology.
2
An ability to comprehend the technological advancements in the usage of modern design tools to analyze and design subsystems/processes for a variety of applications.
3
An ability to learn the courses related to Microelectronics; Signal processing, Microcomputers, Embedded and Communication Systems to develop solutions to real world problems.

About M.Tech


ABES Engineering College provides a two-year Full-time Masters in Technology. (M. Tech Program) with specialization in Electronics and Communication Engineering. This Program was initiated in 2009 under Affiliation from AKTU with an aim to prepare the aspirants for leading roles in Research & Development or Design functions of Electronics Engineering Industries. At ABES, during the duration of two years, students are given exceptional knowledge on various technologies which enhances the skills of a candidate and makes him or her specialist in a particular area or field like Wireless Communication, Optical Communication, Microwave Communication, VLSI Design, Automation and Wireless Sensor Network to opt for his / her dissertation.

Eligibility criteria

B.Tech. in ECE/EE/EEE with minimum 60% marks

Financial Support

1
Scholarship equivalent to 50% of tuition fee during 1st year for candidates securing 65% / 6.5 CGPA (60% / 6.0 CGPA for ABESEC Alumni) or above aggregate marks in B.Tech.
2
Scholarship equivalent to 100% tuition fee during 1st year for candidates securing 75% / 7.5 CGPA (70% / 7.0 CGPA for ABESEC Alumni) or above aggregate marks in B.Tech
3
Teaching Assistantship of Rs. 7000/- (1st Year) & 8000/- (2nd Year) per month will be provided to eligible candidates.
Electronics & Communication Engineering is a constantly changing and widening branch of the engineering profession having applications in every discipline of engineering.
Dr. Rohit Sharma, Head of the Department

We, at ABES EC strongly believe that the holistic development of students is possible by focussing on core areas which are -Concept based learning and comprehensive Industrial Exposure. We are nurturing our students according to their areas of interest. Students are groomed and trained in accordance with their domain identified through a psychometric test, interview with mentor and HoD(taking into account the family background of the student) conducted at the second year level.Firstly, we are providing concept based learning to our students. To achieve this, we have highly qualified, experienced and dynamic faculty members, highly competent lab staff, 11 state of art well equipped advanced Labs to meet the curriculum and industry requirements. Further, we are also having a no. of centres of excellence for– Wireless & sensor, VLSI and Robotics which are funded by different funding agencies.

For improving teaching learning process, we are having an advisory board that includes experts from IITs, NITs and reputed industries. Similarly at 4th year level, students are required to develop three types of major projects like consultancy projects from Industries, application based projects and research based projects.

Secondly, we believe that without minimising the gap between Industry and academia, we cannot make our students globally competent. Therefore, looking forward in this direction we have taken a number of steps such as- We have developed an Employability Enhancement Cell (EEC) which identifies the interest and domain of the students , divides students into four major domains- IT field, Microelectronics, Operation & Maintenance, Designing Devices, Sales and services.

Thirdly, we have set-up an Industrial Academia Relationship cell (IARC) whose primary purpose is to identify the skill set desired by industries and training students accordingly through in-house training programs, involvement in consultancy projects.

Further, we have been able to establish MOUs with more than 10 core electronic companies. Our faculty members and students are working on core projects received from industries. Over the past few years, we have been successful in fetching consultancy projects based on problem statement of various Industries. Additionally, we have incorporated Technology transfer and Placement assistance by signing MOUs with our Industry partners.

Finally, I am happy to say that since we are providing concept based learning, good quality of training and projects from industries, our 100% students are in a position to fetch jobs from reputed companies.

PROF.(DR.) DEVENDRA KUMAR SHARMA
Professor & Director & Professor
director@abes.ac.in
Faculty Image
DR. ROHIT SHARMA
Dean Research & Associate Professor
rohit.sharma@abes.ac.in
Faculty Image
DR. MANISH ZADOO
Associate Professor
manish.zadoo@abes.ac.in
Faculty Image
DR. AJAY SURI
Associate Professor
ajay.suri@abes.ac.in
Faculty Image
DR. MANIDIPA ROY
Associate Professor
manidipa.roy@abes.ac.in
Faculty Image
DR. RAMAN KAPOOR
Associate Professor
raman.kapoor@abes.ac.in
Faculty Image
MR. DEEPAK GARG
Assistant Professor(Sr. Scale)
deepak.garg@abes.ac.in
Faculty Image
MR. SHAILENDRA BISARIYA
Assistant Professor(Sr. Scale)
shailendra.bisariya@abes.ac.in
Faculty Image
MR. MUDIT SAXENA
Assistant Professor(Sr. Scale)
mudit.saxena@abes.ac.in
Faculty Image
MS RITU AGARWAL
Assistant Professor (Sr. Scale)
ritu.agarwal@abes.ac.in
Faculty Image
DR. NAVNEET SHARMA
Assistant Professor (Selection Grade)
navneet.sharma@abes.ac.in
Faculty Image
MS. RANJEETA YADAV
Assistant Professor (Sr. Scale)
ranjeeta.yadav@abes.ac.in
Faculty Image
MS. ARPITA JOHRI
Assistant Professor(Sr. Scale)
arpita.johri@abes.ac.in
Faculty Image
MS. SHILPA SRIVASTAVA
Assistant Professor (Sr. Scale)
shilpa.srivastav@abes.ac.in
Faculty Image
MR. SHAHBAZ ALAM
Assistant Professor(Sr. Scale)
shahbaz.alam@abes.ac.in
Faculty Image
MR. MANISH
Assistant Professor (Sr. Scale)
manish@abes.ac.in
Faculty Image
MS. UPASANA SHARMA
Assistant Professor (Sr. Scale)
upasana.sharma@abes.ac.in
Faculty Image
DR. RAJNESH KUMAR SINGH
Assistant Professor(Selection Grade)
rajnesh.singh@abes.ac.in
Faculty Image
MS. RAKHI KUMARI
Assistant Professor(Sr. Scale)
rakhi.kumari@abes.ac.in
Faculty Image
MS. GEETANJALI RAJ
Assistant Professor(Sr. Scale)
geetanjali.raj@abes.ac.in
Faculty Image
Mr. Kamal Bhatia
ASSISTANT PROFESSOR(Sr.scale)
kamal.bhatia@abes.ac.in
Faculty Image
DR. SHIVAM SINGH
Assistant Professor(Selection Grade)
shivam.singh@abes.ac.in
Faculty Image
MR. HITESH KUMAR TOMAR
Assistant Professor
hitesh.tomer@abes.ac.in
Faculty Image
MS ANKITA BHATT
Assistant Professor(Sr. Scale)
ankita.bhatt@abes.ac.in
Faculty Image
Ms POOJA PATHAK
ASSISTANT PROFESSOR(SR. SCALE)
pooja.pathak@abes.ac.in
Faculty Image
MS UNNATI CHANDRAKANT MEHTA
Assistant Professor
unnati.mehta@abes.ac.in
Faculty Image
MS KAVITA CHAUDHARY
Assistant Professor
kavita.chaudhary@abes.ac.in
Faculty Image
Dr. Aarti Sharma
Assistant Professor
Faculty Image
MS Anupam
Assistant Professor
anupam@abes.ac.in
Faculty Image
Dr. Aakriti Chhabra
Assistant Professor
Faculty Image
Dr. Shivani Sharma
Assistant Professor
Faculty Image
Ms. Sonam Tyagi
Assistant Professor
Faculty Image
Journals
Conference
Patent
Book Chapter
Books
Publications details for CAY (2024-25)

1
Pathak, Pooja, and Richa Bhatia. "Investigation of LDPC codes with interleaving for 5G wireless networks." Annals of Telecommunications (July 2024): 1-11. (SCIE)
2
Kumar, R., Singh, S., Chaudhary, B., Bhardwaj P., et al. "Improved ZnO-Ag-graphene oxide surface plasmon resonance organic sensor." Opt Quant Electron 56, 1391 (2024). https://doi.org/10.1007/s11082-024-07322-6
3
Kumar, R., Singh, S., Chaudhary, B., Bhardwaj P., et al. "Detection of SARS-CoV-2 with enhanced Cu-Ni-graphene plasmonic biosensor: a numerical analysis." Opt Quant Electron 56, 1358 (2024). https://doi.org/10.1007/s11082-024-07248-z
4
Upadhyay, A., Singh, S., Chaudhary, B., Bhardwaj P. et al. "Biosensor Performance Signature Enhancement with Silver-MXene-Graphene for Brain Tumor Diagnosis Through the Employment of Surface Plasmon Resonance." Plasmonics (2024). https://doi.org/10.1007/s11468-024-02483-2
5
Kumar, R., Singh, S., Sarkar, P. et al. "Sensitivity Enhancement of Franckeite-Based Surface Plasmon Resonance Sensors Using A Bimetallic Structure." Plasmonics (2024). https://doi.org/10.1007/s11468-024-02432-z
6
Aijaz M. Zaidi, Binod K. Kanaujia, Jugul Kishor, Sumer Singh Singhwal, Vikrant Kaim, Amit Kumar, Karumudi Rambabu, R. Rengarajan. "Design Techniques for Passive Planar Reconfigurable RF Circuits." IEEE Microwave Magazine 01-09-2024
Publications details for CAY (2023-24)

1
KanchanKumari, Manidipa Roy, PriyankaBhardwaj. "An advanced IoT based digital door lock using Blockchain based on GCP technology." Industrial Engineering Journal, Volume-53, Issue-5, No.5, May 2024 (UGC)
2
ParidhiPandey, Manidipa Roy, PriyankaBhardwaj. "Patient Healthcare Monitoring system based on IoT." Industrial Engineering Journal, Volume 53, Issue 5, No.8, May 2024 (UGC)
3
KanchanKumari, Manidipa Roy, PriyankaBhardwaj. "An advanced IoT based digital door lock using Blockchain based on GCP technology: A Review." Industrial Engineering Journal, Vol.53, Issue-4, No.11, May 2024 (UGC)
4
Vidushi Gupta, ShubhanshMahawar, Manidipa Roy, Priyanka Bhardwaj, Sanjay Singh. "Review on Metamaterial Based Patch Antenna for Satellite Communication." Industrial Engineering Journal, Volume 53, Issue 3, No.2, March 2024 (UGC)
5
Vidushi Gupta, Shubhansh Mahawar, Manidipa Roy, Priyanka Bhardwaj, Sanjay Singh. "Metamaterial Based Patch Antenna for Satellite Communication." Industrial Engineering Journal, Volume 53, Issue 5, No.12, May 2024 (UGC)
6
VipulVerma, ShashankShekherYadav, Manidipa Roy, Priyanka Bhardwaj, Sanjay Kumar Singh. "Metamaterial Patch Antenna for Biomedical Application." Industrial Engineering Journal, Volume 53, Issue 3, No.2, March 2024 (UGC)
7
M. Roy et al. "CSRR loaded multiband THz MIMO antenna for nano-communications and bio-sensing applications." Nano Communication Networks 38 (2023): 100481.(SCI)
8
R. Shrama et al. "Video Object Detection From Compressed Formats for Modern Lightweight Consumer Electronics." IEEE Transactions on Consumer Electronics, vol. 70, no. 1, pp. 4507-4514, Feb. 2024, doi: 10.1109/TCE.2023.3325480. (SCI)
9
R. Shrama et al. "A Novel Hybrid, BERT and Deep Learning Model Network Intrusion Detection System for Healthcare Electronics." IEEE Transactions on Consumer Electronics, doi: 10.1109/TCE.2024.3412199.
10
M. Zadoo et al. "Design and Development of Electric Veena (DIGIFRET)." 2023 International Conference on Sustainable Emerging Innovations in Engineering and Technology (ICSEIET), Ghaziabad, India, 2023, pp. 70-73, doi: 10.1109/ICSEIET58677.2023.10303339. (SCOPUS Conf)
11
Shivam Singh et al. "Theoretical analysis of a refractive index sensor based on a photonic crystal fiber with a rectangular core." Optical Fiber Technology, vol. 78, 2024, 103492, doi: 10.1016/j.yofte.2024.103492. (SCI)
12
Shivam Singh et al. "Numerical Analysis of a Photonic Crystal Fiber‐Based Biosensor for the Detection of Vibrio cholera and Escherichia coli Bacteria in the THz Regime." physica status solidi (a), vol. 221, no. 2, 2024, 2300622. (SCI)
13
Shivam Singh et al. "Enhanced Cu-Ni-TiO₂-BP plasmonic biosensor for highly sensitive biomolecule detection and SARS-CoV-2 Diagnosis." IEEE Sensors Journal, 2023. (SCI)
14
Shivam Singh et al. "A Numerical Analysis of Rectangular Open Channel Embedded TiO₂-Au-MXene Employed PCF Biosensor for Brain Tumor Diagnosis." IEEE Sensors Journal, 2024. (SCI)
15
Shivam Singh et al. "Black Phosphorus-Based Surface Plasmon Resonance Biosensor for DNA Hybridization." IEEE Transactions on Plasma Science, 2024. (SCI)
16
Shivam Singh et al. "Titanium Dioxide-Graphene-Black Phosphorus-Based SPR Sensor for Helicobacter Pylori Bacteria Detection." IEEE Sensors Journal, 2024. (SCI)
17
Navneet Sharma et al. "Compact two-port antenna with high isolation based on the defected ground for THz communication." Results in Optics, vol. 13, 2023, 100522. (Scopus)
18
Navneet Sharma et al. "A metamaterial inspired split ring resonator accomplished multiband antenna for 5G and other wireless applications." REVUE ROUMAINE DES SCIENCES TECHNIQUES—SÉRIE ÉLECTROTECHNIQUE ET ÉNERGÉTIQUE, vol. 68, no. 2, 2023, pp. 127-131. (SCI)
19
Nishant Pandey, Raghav Shah, Kshitij Kumar, Nilesh Agarwal, Ranjeeta Yadav. "DIY Ventilator using Arduino." International Journal for Research in Applied Science & Engineering Technology (IJRASET), vol. 12, issue V, May 2024. (Non-UGC)
20
Anand Vishwakarma, Animesh Yash, Anshika Singh, Divyanshu Awasthi, Ranjeeta Yadav. "IoT Mining Tracking & Worker Safety Helmet." International Journal for Research in Applied Science and Engineering Technology, vol. 12, issue V, May 2024. (Non-UGC)
21
Bisariya, Shailendra, and Neelofer Afzal. "BDCDTA-based Reconfigurable Frequency Selective Filter Structures for Medium Wave Communication and Biomedical Signal Processing Applications." Indian Journal of Pure and Applied Physics, 2024. (Scopus)
22
Krishna Kumar, Kabir Mendiratta, Priyanshu Sharma, Shailendra Bisariya, Mudit Saxena. "Fast Fourier Transform And Its Architectures." IJEEE, vol. 16, issue 1, 2024. (Non-UGC)
23
Shailendra Bisariya, Mudit Saxena, Riya Srivastava, Vidhi Verma, Shivam Tiwari. "Design and Implementation of a Low Power High Speed Full Adder Cell for Low Power Applications." IJARSE, vol. 13, issue 5, May 2024. (Non-UGC)
24
Adarsh Bhardwaj, Amar Jyothi, Amit Pal, Ankit Kumar Bharti, Shailendra Bisariya. "Advanced Low-Power High-Speed SAFF Implementation with MTCMOS in 45nm." International Journal of Advance Research and Innovative Ideas in Education, vol. 10, issue 3, 2024.
25
Raj Kesarwani, Rahul Pandey, Sahil Agarwal, Shailendra Bisariya, Mudit Saxena. "Design Analysis and Implementation of Two Stage Operational Amplifier." International Journal of Advance Research and Innovative Ideas in Education, vol. 10, issue 3, 2024.
26
Manish Katiyar, Deepti. "Recent Advances in Electrochemical Biosensors Targeting Stress Markers." Combinatorial Chemistry & High Throughput Screening, vol. 27, no. 13, 2024, pp. 1877-1886. (SCI)
27
Manish Katiyar, Deepti, et al. "Electrochemical Sensors for Detection of Phytomolecules: A Mechanistic Approach." Combinatorial Chemistry & High Throughput Screening, 2024. (SCI)
28
Srivastava, Shilpa, Sanjay Kumar Singh, Usha Tiwari. "Optimization of Metamaterial Unit Cell Using Radial Basis Function Neural Network." Optical Memory and Neural Networks, vol. 32, no. 3, 2023, pp. 204-218. (ESCI)
29
Navneet Sharma, Himani, Shilpa Srivastava. "Wearable Metamaterial Inspired Antenna for ISM, WiMAX, WLAN, Wi-Fi 6E (6 GHz), Aeronautical Radio Navigation and Radio-Location Applications." Progress in Electromagnetics Research Letters, vol. 121, 2024, pp. 93-99. (ESCI)
30
Swarit Pandey, Vaibhav Mohan, Kamal Bhatia, Shilpa Srivastava. "Design and Simulation of Vedic Multiplier Using Verilog HDL." International Journal for Research in Applied Science and Engineering Technology, vol. 12, issue 4, April 2024. (Non-UGC)
31
Mainak Basu, Varnita Verma, Arpita Johari. "Pre-Feasibility Analysis of an Improved Sand Piper Optimization Convolution Neural Network (ISO-CNN) based Hybrid Solar and Biomass Energy System." International Journal of Intelligent Systems and Applications in Engineering, vol. 12, issue 3, 2024, pp. 2114-2125. (Scopus)
32
Sanskar Jindal, Sarthak Upadhyay, Siddhant Kumar, Upasana Sharma. "Soldiers using IoT." International Journal for Research in Applied Science & Engineering Technology (IJRASET), April 2024.
33
Harsh Chaurasiya, Prashant Kumar, Upasana Sharma. "Fully Automated Solar Grass Cutter." International Journal for Research in Applied Science & Engineering Technology (IJRASET), vol. 12, issue V, May 2024. (UGC Journal)
34
Ms. Niharika Sharma, Mr. Harsh Pratap Singh, Mr. Parth Kumar Dhiman, Ms. Rakhi Kumari. "Design & Implementation of IoT Based Smart Helmet for Road Accident Detection." Industrial Engineering Journal, vol. 5, April 2024. (UGC)
35
Shubh Tyagi, Reyansh, Utkarsh, Anupam. "Arduino Based IoT Smart Parking System." IJRASET, May 2024. (Non-Scopus)
36
Keshav Goel, Kunal Singh Naruka, Gautam Garg, Anupam Singh. "Automated Air Purifier Robot." International Journal for Research in Applied Science & Engineering, May 2024. (Non-Scopus)
37
Agarwal, Ritu, Richa Bhatia. "Multipath Routing Using Genetic Algorithm in Elastic Optical Network." Journal of Optics, 2023, pp. 1-6. (Scopus)
38
Shreyansh Dubey, Ritu Agarwal. "Smart Car Parking System and Generation of Piezoelectric Energy." International Journal for Research in Applied Science & Engineering Technology, May 2024. (Non-Scopus)
39
Zeeshan Khan, Satyam Verma, Vishwajeet Kumar Singh, Ritu Agarwal. "Review Paper on Design Smart Helmet Using Internet of Things." Industrial Engineering Journal, March 2024. (Non-Scopus)
40
Sachin Jaiswal, Sahil Jain, Utkarsh Dhar Dubey, Tanmay Srivastava, Pooja Pathak. "Smart Wheelchair for Specially Abled People." International Journal of Innovative Science and Research Technology, vol. 9, issue 3, March 2024, ISSN No: 2456-2165.
41
Anushka Tiwari, Arpit Srivastava, Deepesh Attri, Rajeev Pandey. "WiFi-Tally: Crowd Monitoring and Counting: Review." International Journal for Research in Applied Science & Engineering, May 2024.
42
Vansh Sharma, Yash Tonk, Vaibhav Gupta, Mr. Rajeev Kumar Pandey. "IoT Based Smart Robotic Vehicle for Multiple Applications." International Journal of Creative Research Thoughts, March 2024.
43
Unnati Mehta, Ehtesham Ahmed, Mohd Arsh Ali, Pratham Maurya. "FPGA Based Air Quality Monitoring System." IJRASET, January 1, 2024.
44
Ms. Unnati Mehta, Aniket Rana, David Chaudhary, Akshita Singh, David Chaudhary. "IoT Based Health Monitoring System Using FPGA." IJRASET, May 1, 2024.
Publications details for CAY (2022-23)

1
Roy, Manidipa, PriyankaBhardwaj, and Sanjay Kumar Singh. "Compact slotted circularly polarized microstrip patch antenna with surface wave suppressed characteristics for WLAN characteristics." Trends in Sciences 19.13 (2022): 4649-4649.(SCOPUS)
2
Adyasri Sinha, Anmol Singh, Aditya Baghel, Priyanka Bhardwaj. "SMART GPS GEOFENCING SYSTEM: A REVIEW." Industrial Engineering Journal ISSN: 0970-2555 Volume: 52, Issue 6, No. 1, June 2023 (UGC)
3
Divya Yadav, Jalaj Biswas, Karan Gupta, Priyanka Bhardwaj. "REVIEW PAPER ON LORA BASED WEATHER STATION SYSTEM." Industrial Engineering Journal ISSN: 0970-2555 Volume: 52, Issue 4, No. 3, April 2023 (UGC)
4
Karan Gupta, Divya Yadav, Jalaj Biswas, Priyanka Bhardwaj. "RESEARCH PAPER ON LORA BASED WEATHER STATION SYSTEM." Industrial Engineering Journal ISSN: 0970-2555 Volume: 52, Issue 4, April 2023 (UGC)
5
Ishani Nigam, Kushagra Punia, Manidipa Roy. "Review Paper On Microstrip Patch Antenna Bandwidth Enhancement Using Metasurface." GIS Science Journal, VOLUME 9, ISSUE 11, 2022 (UGC)
6
Shruti Singh, Yash Yadav, Lalit Sharma, Manidipa Roy. "Review Paper On Wheelchair With Advanced Communication." GIS Science Journal, VOLUME 9, ISSUE 11, 2022 (UGC)
7
Pratyush Raj, Nidhi, Piyush Yadav, Manidipa Roy. "Review Paper on Design of Miniaturized Patch Antenna for Biomedical Applications." GIS Science Journal, VOLUME 9, ISSUE 11, 2022 (UGC)
8
Zadoo, Manish, Meenakshi Sharma, Amit Choudhary. "FEELS: fuzzy based energy efficient and low SAR routing protocol for wireless body area networks." Wireless Networks 28.8 (2022): 3593-3611. (SCI)
9
Singh, Shivam, et al. "A review on various sensing prospects of SPR based photonic crystal fibers." Photonics and Nanostructures-Fundamentals and Applications 54 (2023): 101119. (SCI)
10
Singh, Shivam, et al. "Bottom side partially etched D-shaped PCF biosensor for early diagnosis of cancer cells." The European Physical Journal Plus 138.6 (2023): 511.
11
Shivam Singh, et al. "Identification of four detrimental chemicals using square-core photonic crystal fiber in the regime of THz." Journal of Applied Physics 133.24 (2023).
12
Ajay Suri, Hritik Sharma, Mamta Karakoti, Rachit Mishra. "SMS based Intelligent Dustbin for Garbage Flooding Protection." GRADIVA REVIEW JOURNAL, 01-08-2022 (UGC)
13
Avichal Vashishtha, Ayush Aggarwal, Abhinav Mishra, Ashutosh Mishra, Ajay Suri, Upasana Sharma. "Remote Health Monitoring System." GRADIVA REVIEW JOURNAL, 02-08-2022 (UGC)
14
Avichal Vashishtha, Ayush Aggarwal, Abhinav Mishra, Ashutosh Mishra, Ajay Suri, Upasana Sharma. "Health Monitoring System for Patient using IOT, GSM and Raspberry Pie." Compliance Engineering Journal, 01-08-2022 (UGC)
15
Ajay Suri, Rachit Mishra, Hritik Sharma, Mamta Karakoti. "Waste Management System Using IoT and Machine Learning." GRADIVA REVIEW JOURNAL, 02-08-2022 (UGC)
16
Priyanshi Jhalani, Muskan Bharadwaj, Pavni Sharma, Ms. Shilpa Srivastava. "Biometric Based Electronic Voting Machine." Industrial Engineering Journal, ISSN: 0970-2555, Volume 52, Issue 5, No. 5, May 2023 (UGC)
17
Devrat Tyagi et al. "ICIC: A Dual Mode Intra-Cluster and Inter-Cluster Energy Minimization Approach for Multihop WSN." IEEE Access 10 (2022): 70581-70594.
18
Priyanshi, Priyanshi Tyagi, Harshit Saxena, Anshuman Singh, Manidipa Roy, and Tania Gupta. "A Novel Approach to Optimize Power in Solar Panel." CEJ, Volume 13, Issue 5, 2022 (UGC)
19
Raj, G., Verma, A., Dalal, P., Shukla, A.K., Garg, P. "Performance Comparison of Several LPWAN Technologies for Energy Constrained IoT Network." International Journal of Intelligent Systems and Applications in Engineering, 16-01-2023.
20
Alam, Md Shahbaz, et al. "Realization of Universal Filter Using CCII." Flexible Electronics for Electric Vehicles: Select Proceedings of FlexEV—2021. Singapore: Springer Nature Singapore, Oct 2022. 395-407.
21
Tyagi, Priyanka, Sanjay Kumar Singh, and Piyush Dua. "Ultra-low Power 8-Transistor Modified Gate Diffusion Input Carbon Nano-Tube Field Effect Transistor Full Adder." IETE Journal of Research 69.8 (2023): 5518-5531.
Publications details for CAY (2024-25)

1
Mehta, Ms Unnati Chandrakant, Mehta, Nitin, and Bansal, Ms Urvashi. "FGMOS Based Low Power Analog Subtractor." ICCSC-2024 (accepted).
2
Tyagi, A., Mishra, A., Tiwari, A., Chaudhary, A., Singh, S., and Bhatia, K. "A Review on SPR Based PCF Refractometric Sensor." 2024 International Conference on Integrated Circuits, Communication, and Computing Systems (ICIC3S), Una, India, 2024.
3
Kumar, V., Upmanu, V., Singh Chauhan, R. P., Sharma, N., Kumar, B. V., and Zadoo, M. "Real-Time Environmental Monitoring and Control for Ensuring Optimal Temperature and Humidity Conditions for Patient Comfort and Medical Equipment Integrity." 2024 3rd International Conference on Sentiment Analysis and Deep Learning (ICSADL), Bhimdatta, Nepal, 2024.
Publications details for CAY (2023-24)

1
M. Roy, P. Bhardwaj and S. K. Singh et al. "Bluetooth Based Home Automation Using Android Phone." 2023 International Conference on Sustainable Emerging Innovations in Engineering and Technology (ICSEIET), Ghaziabad, India, 2023, pp. 491-493, doi: 10.1109/ICSEIET58677.2023.10303415 (SCOPUS Conf)
2
A. Choudhary, M. Roy, P. Bhardwaj and S. K. Singh. "2.4 GHz Microstrip Patch Antenna for Wi-Fi Application." 2023 International Conference on Sustainable Emerging Innovations in Engineering and Technology (ICSEIET), Ghaziabad, India, 2023, pp. 833-836, doi: 10.1109/ICSEIET58677.2023.10303406 (SCOPUS Conf)
3
Vartika, S. K. Singh, P. Bhardwaj and M. Roy. "Review of Technique and Performance Analysis of FSO (Free Space Optical Fiber)." 2023 International Conference on Sustainable Emerging Innovations in Engineering and Technology (ICSEIET), Ghaziabad, India, 2023, pp. 527-531, doi: 10.1109/ICSEIET58677.2023.10303327
4
P. Bhardwaj, M. Roy, S.K. Singh et al. "A Comprehensive Analysis of Mask Detection Using Convolutional Neural Networks (CNN) and Single Shot Multibox Detector (SSD) Approach." 2023 International Conference on Sustainable Emerging Innovations in Engineering and Technology (ICSEIET), Ghaziabad, India, 2023, pp. 512-516, doi: 10.1109/ICSEIET58677.2023.10303567
5
M. Poonia and P. Bhardwaj. "The Concept of Complex Neutrosophic Hesitant Fuzzy Graph is Used to Solve a Problem Related to Cellular Network." 2023 International Conference on Sustainable Emerging Innovations in Engineering and Technology (ICSEIET), Ghaziabad, India, 2023, pp. 899-904, doi: 10.1109/ICSEIET58677.2023.10303510 (SCOPUS Conf)
6
A. Yadav, F. K. Rana, G. Raj, A. Yadav, A. Sachan and P. Bhardwaj. "Smart Door Locking System Using LoRa Technology." 2022 10th International Conference on Emerging Trends in Engineering and Technology - Signal and Information Processing (ICETET-SIP-22), Nagpur, India, 2022, pp. 1-5, doi: 10.1109/ICETET-SIP-2254415.2022.9791632 (SCOPUS Conf)
7
Zadoo, Manish, et al. "Advanced Surveillance System for Women Safety." 2023 International Conference on Sustainable Emerging Innovations in Engineering and Technology (ICSEIET). IEEE, 2023
8
Manish Zadoo et al. "Design and Development of Electric Veena (DIGIFRET)." 2023 International Conference on Sustainable Emerging Innovations in Engineering and Technology (ICSEIET). IEEE, 2023
9
Shivam Singh et al. "An Investigation of Square Hole Based Cladding with Perforated Core for Large Birefringence and Highly Negative Dispersion." 2023 International Conference on Sustainable Emerging Innovations in Engineering and Technology (ICSEIET). IEEE, 2023
10
Navneet Sharma et al. "Isolation Enhancement of Two Element MIMO Antenna Based on Neutralization Technique." 2023 3rd International Conference on Advancement in Electronics & Communication Engineering (AECE). IEEE, 2023
11
Sharma, Navneet, and Narbada Prasad Gupta. "Dual Band Microstrip Patch Antenna for maritime navigation as well as fixed satellite and mobile communication." 2023 International Conference on Sustainable Emerging Innovations in Engineering and Technology (ICSEIET). IEEE, 2023
12
Aggarwal, A., Kumar, V., Singhal, V., and Yadav, R. "Soldier Health and Position Tracking System." 2023 International Conference on Sustainable Emerging Innovations in Engineering and Technology (ICSEIET). IEEE, 2023.
13
Saxena, A., Bhardwaj, A., Gupta, C., Kesarwani, R., and Bisariya, S. "IOT-Based Patient Wellness Tracking System." 2023 International Conference on Sustainable Emerging Innovations in Engineering and Technology (ICSEIET). IEEE, 2023.
14
Bisariya, Shailendra, et al. "A Review of Live Weather Monitoring Systems Based on IoT." 2023 International Conference on Sustainable Emerging Innovations in Engineering and Technology (ICSEIET). IEEE, 2023.
15
Suri, A., Goswami, P., et al. "Implementation and Framework for Virtual Reality Integration in Real Estate Industry Application." 2024 5th International Conference on Intelligent Communication Technologies and Virtual Mobile Networks (ICICV). IEEE, 2024.
16
Tayal, Kavya Kumar, Suri, Ajay, and Bhadauria, Rohit Vikram Singh. "Implementation and design of traffic light controller using Verilog." Proceedings of the 5th International Conference on Advances in AI for Biomedical Instrumentation, Electronics and Computing, ICABEC 2023.
17
Mishra, K., and Suri, A. "Design and implementation of Vedic multiplier." Proceedings of the 5th International Conference on Advances in AI for Biomedical Instrumentation, Electronics and Computing, ICABEC 2023.
18
Singhal, Gaurang, and Suri, Ajay. "Exploring the Performance and Power Efficiency of FPGA-Based Tic-Tac-Toe on Spartan3 FPGA Image Processing Kit." International Conference on Advanced Computing & Communication Technologies (ICACCTech), 23 Dec, 2023.
19
Manish, Sharma, N., and Gupta, N. P. "Dual Band Microstrip Patch Antenna for maritime navigation as well as fixed satellite and mobile communication." 2023 International Conference on Sustainable Emerging Innovations in Engineering and Technology (ICSEIET). IEEE, 2023.
20
Pradumn, Adhikari, Kamlesh Singh, and Srivastava, Shilpa. "Microstrip Patch Antenna for IoT." Innovations in Clean Energy Technologies (ICET-2023) by MANIT Bhopal.
21
Bhardwaj, Priyanka, Roy, Manidipa, Srivastava, Shilpa, Singh, Sanjay Kumar, Gupta, Vidushi, and Novita, Mega. "Review Paper on Bluetooth Based Home Automation Using Android Phone." 2023 International Conference on Sustainable Emerging Innovations in Engineering and Technology (ICSEIET). IEEE, 2023.
22
Chaurasia, Vartika, Naithani, Shantanu, and Sharma, Upasana. "COVID-19 safety protocol measuring (CSPM) system." NANOELECTRONICS, MACHINE LEARNING, INTERNET OF THINGS & COMPUTING SYSTEMS (NMIC-2023).
23
Sitholey, Rishit, Bansal, Siddhant, Jhanwar, Ujjaval, Rana, Ujjwal, and Sharma, Upasana. "Night Surveillance Drone With Thermal Imaging For Campus." Innovations in Clean Energy Technologies (ICET-2023).
Publications details for CAY (2022-23)

1
Ashi Gupta, Sanjay Kumar Singh, Priyanka Bhardwaj, “Student System Using ODOO”, 3rd International Conference on NANOELECTRONICS, MACHINE LEARNING, INTERNET OF THINGS & COMPUTING SYSTEMS (NMIC-2023)(SCOPUS Conf)
2
Ashi Gupta, Sanjay Kumar Singh, Priyanka Bhardwaj, “Student System Using ODOO”, International Conference on Innovative Research in Science & Technology(SCOPUS Conf)
3
Navneet Sharma et al. "Patch antenna for microwave hyperthermia applications." Proceedings of the Advancement in Electronics & Communication Engineering (2022)
4
Sharma, Navneet, et al. "A review on wearable microstrip antenna." Proceedings of the Advancement in Electronics & Communication Engineering (2022)
5
Sharma, Navneet, et al. "CSRR Loaded Compact Textile Antenna with Defected Ground for Wearable 5G and Wi-Fi 6E Applications." 2023 2nd International Conference on Paradigm Shifts in Communications Embedded Systems, Machine Learning and Signal Processing (PCEMS). IEEE, 2023
6
Sharma, Navneet, et al. "Elephant head-shaped Radiator based on Tripleband MIMO Antenna with Shorting Pins and Neutralization strip in ground used for Enhanced Isolation." 2023 10th International Conference on Signal Processing and Integrated Networks (SPIN). IEEE, 2023
7
Sharma, Navneet, et al. "Parasitic and Open slot-based Circular polarized Two-port Antenna for ISM applications." 2023 International Conference on Artificial Intelligence and Smart Communication (AISC). IEEE, 2023
8
Sharma, Navneet, et al. "Circularly Polarized Triangular-shaped Antenna and modified Inclined-shaped defected ground for Fixed Satellite Communication Applications." 2023 International Conference on Artificial Intelligence and Smart Communication (AISC). IEEE, 2023
9
Sharma, Navneet, et al. "Shorting pin and SRR loaded multi-band Antenna for 4G/5G/Wi-Fi/WiMAX and IOT Applications." 2023 International Conference on Artificial Intelligence and Smart Communication (AISC). IEEE, 2023
10
Yadav, Ranjeeta, et al. "Review on FIR Filters Using Different Adders and Multipliers Based on Vedic Mathematics." 2021 International Conference on Simulation, Automation & Smart Manufacturing (SASM). IEEE, 2021 (Date of Publication 1st August, 2023)
11
Yadav, Ranjeeta, and Sachin Yadav. "IoT-Based RFID checkout system." AIP Conference Proceedings. Vol. 2782. No. 1. AIP Publishing, 2023.
12
Ramkumar M, Ranjeeta Yadav, Sachin Yadav and S M Ramesh. “Deep Learning Approach for Radical Sound Valuation of Fetal Weight”, ECS Trans. 107 2735, 2022.
13
Shailendra Bisariya et al. "A review on CMOS operational transconductance amplifier on different technology node." Proceedings of the Advancement in Electronics & Communication Engineering (2022).
14
Gupta Neeraj, Manish. “Management of Neurodegenerative Disease by Machine Learning: A Trending Approach”, 14th International Conference on Advances in Computing, Control, and Telecommunication Technologies, ACT 2023 (Scopus Conf).
15
Arpita Johri, Priyanka Verma, Niharika Goswami, Nikki Dagar. Kinesics Interpreter for Physically Disabled, International Conference on Science, Technology & Management, Cochin, 21/05/2023.
16
R. K. Verma, L. Bhaskar and S. Srivastava. "Design and Analysis of an Inset Fed Patch Antenna with Defective Ground for Millimeter Waves the Future of Telecommunication," 2023 International Conference on Computational Intelligence, Communication Technology and Networking (CICTN), Ghaziabad, India, 2023, pp. 569-574, doi: 10.1109/CICTN57981.2023.10140953.
17
Sharma, Upasana Gupta, Kavya et al. "Machine Learning based Credit Card Fraud Detection-A Review." 2022 International Conference on Applied Artificial Intelligence and Computing (ICAAIC). IEEE, 2022.
18
Aman Kumar, Akshat Srivastava, Arpan Jain, Rakhi Kumari. Effect Of Truncation On Rectangular Patch Antenna, International Conference on Science, Engineering & Technology, (ICSET-23).
19
Raj, Geetanjali, Tanishk Mishra, and TusharTegwani. "Large Screen Wireless Notice Board with P10 Led Matrix Modules using LoRa." 2023 International Conference on Artificial Intelligence and Smart Communication (AISC). IEEE, 2023.
20
Singh, Shivangi, Shrey Bharadwaj, and Geetanjali Raj. "Face Recognition Application using MATLAB & Python." 2023 International Conference on Artificial Intelligence and Smart Communication (AISC). IEEE, 2023.
21
Rathi, Neetu, Singh, Sanjay kumar et al. "A review of low-power static random access memory (sram) designs." 2023 IEEE Devices for Integrated Circuit (DevIC) (2023): 455-459.
Patent (2022-24)

1
Application Number: 202311081657, Application Status: Published, Year: 2023-24, Title of Invention: Transforming Learning with Systematic Eye-Tracking Techniques, Inventors: Kavita, Pooja Pathak, Manidipa Roy, Priyanka Bhardwaj, Sanjay Kumar Singh
2
Application Number: 202311081831, Application Status: Published, Year: 2023-24, Title of Invention: Innovative Assistance System for Enhancing Education among Physically Challenged Individuals, Inventors: Anupam Singh, Shivam Singh, Geetanjali Raj, Manidipa Roy, Jugul Kishor, Manish Zadoo, Priyanka Bhardwaj, Sanjay Kumar Singh
3
Application Number: 202311081830, Application Status: Published, Year: 2023-24, Title of Invention: An Intelligent System for Residential Protection from Wild Animals, Inventors: Geetanjali Raj, Anupam Singh, Ranjeeta Yadav, Ritu Agarwal, Ajay Suri, Manish Zadoo
4
Application Number: 202311081936, Application Status: Published, Year: 2023-24, Title of Invention: A Real-time based Remote Sensing system for Landslide Prediction and Monitoring with Geospatial Analysis, Inventors: Pooja Pathak, Rajeev Pandey, Anupam Singh, Hitesh Tomar, Ritu Agarwal, Ajay Suri, Manish Zadoo
5
Application Number: 202311081937, Application Status: Published, Year: 2023-24, Title of Invention: Waterproof IoT based system for Remote Water Quality and Level Monitoring, Inventors: Kavita, Manidipa Roy, Jugul Kishor, Manish Zadoo, Priyanka Bhardwaj, Sanjay Kumar Singh
6
Application Number: 202211075224, Application Status: Published, Year: 2022-23, Title of Invention: Tracking Device For Luggage, Inventors: Ms. Tania Gupta, Ms. Khushbu Bansal, Anukrati Sharma, Amit Bhatt, Agnimitra Mishra
7
Application Number: 202211075135, Application Status: Published, Year: 2022-23, Title of Invention: Night Surveillance Drone with Thermal Imaging, Inventors: Ms. Upasana Sharma, Ms. Pallavie Tyagi, Ujjwal Jhanwar, Ujjwal Rana, Rishit Sithole, Siddhant
8
Application Number: 202211075136, Application Status: Published, Year: 2022-23, Title of Invention: Covid Safety Measuring System, Inventors: Ms. Upasana Sharma, Vartika Chaurasia, Shantanu Naithani
9
Application Number: 202211074292, Application Status: Published, Year: 2022-23, Title of Invention: LoRa and Wi-Fi based weather station, Inventors: Prof. (Dr.) Priyanka Bhardwaj, Dr. Manidipa Roy, Prof. (Dr.) Sanjay Kumar Singh, Divya Yadav, Jalaj Biswas, Karan Gupta
10
Application Number: 202211061896, Application Status: Published, Year: 2022-23, Title of Invention: Wheel chair with advanced communication, Inventors: Dr. Manidipa Roy, Prof. (Dr.) Priyanka Bhardwaj, Prof. (Dr.) Sanjay Kumar Singh, Shruti Singh, Yash Yadav, Lalit Sharma
11
Application Number: 202211072989, Application Status: Published, Year: 2022-23, Title of Invention: Tracking System in Wireless Bluetooth earphones and neck bands, Inventors: Ms. Geetanjali Raj, Shivangi Singh, Shrey Bhardwaj
12
Application Number: 202211073295, Application Status: Published, Year: 2022-23, Title of Invention: SMS based Intelligent Dustbin for Garbage Flooding Protection, Inventors: Dr. Ajay Suri, Prof (Dr.) Sanjay Kumar Singh, Dr. Manish Zadoo
13
Application Number: 202211075301, Application Status: Published, Year: 2022-23, Title of Invention: Advanced Surveillance and Protection system-for Women (PRRS), Inventors: Dr. Manish Zadoo, Prof(Dr.) Sanjay Kumar Singh, Dr. Ajay Suri, Mr. Ayush Singh, Ms. Diksha Gupta, Mr. Bhavya Pande
14
Application Number: 202211075507, Application Status: Published, Year: 2022-23, Title of Invention: An Intelligent Digital Power Management and theft prevention system for smart homes (SEEMS), Inventors: Dr. Manish Zadoo, Prof(Dr.) Sanjay Kumar Singh, Dr. Ajay Suri, Ms. Ekta Singh Yadav, Mr. Gurpreet Singh
15
Application Number: 202211077068, Application Status: Published, Year: 2022-23, Title of Invention: Encrypted Wearable electronic patch card for infant/toddler safety using AI, Inventors: Ms. Pallavie Tyagi, Ms. Khusbu Bansal
8
Application Number: 202211075136, Application Status: Published, Year: 2022-23, Title of Invention: Covid Safety Measuring System, Inventors: Ms. Upasana Sharma, Vartika Chaurasia, Shantanu Naithani
9
Application Number: 202211074292, Application Status: Published, Year: 2022-23, Title of Invention: LoRa and Wi-Fi based weather station, Inventors: Prof. (Dr.) Priyanka Bhardwaj, Dr. Manidipa Roy, Prof. (Dr.) Sanjay Kumar Singh, Divya Yadav, Jalaj Biswas, Karan Gupta
10
Application Number: 202211061896, Application Status: Published, Year: 2022-23, Title of Invention: Wheel chair with advanced communication, Inventors: Dr. Manidipa Roy, Prof. (Dr.) Priyanka Bhardwaj, Prof. (Dr.) Sanjay Kumar Singh, Shruti Singh, Yash Yadav, Lalit Sharma
11
Application Number: 202211072989, Application Status: Published, Year: 2022-23, Title of Invention: Tracking System in Wireless Bluetooth earphones and neck bands, Inventors: Ms. Geetanjali Raj, Shivangi Singh, Shrey Bhardwaj
12
Application Number: 202211073295, Application Status: Published, Year: 2022-23, Title of Invention: SMS based Intelligent Dustbin for Garbage Flooding Protection, Inventors: Dr. Ajay Suri, Prof (Dr.) Sanjay Kumar Singh, Dr. Manish Zadoo
13
Application Number: 202211075301, Application Status: Published, Year: 2022-23, Title of Invention: Advanced Surveillance and Protection system-for Women (PRRS), Inventors: Dr. Manish Zadoo, Prof(Dr.) Sanjay Kumar Singh, Dr. Ajay Suri, Mr. Ayush Singh, Ms. Diksha Gupta, Mr. Bhavya Pande
14
Application Number: 202211075507, Application Status: Published, Year: 2022-23, Title of Invention: An Intelligent Digital Power Management and theft prevention system for smart homes (SEEMS), Inventors: Dr. Manish Zadoo, Prof(Dr.) Sanjay Kumar Singh, Dr. Ajay Suri, Ms. Ekta Singh Yadav, Mr. Gurpreet Singh
15
Application Number: 202211077068, Application Status: Published, Year: 2022-23, Title of Invention: Encrypted Wearable electronic patch card for infant/toddler safety using AI, Inventors: Ms. Pallavie Tyagi, Ms. Khusbu Bansal
16
Application Number: 202211077303, Application Status: Published, Year: 2022-23, Title of Invention: Biometric Electronic Voting Machine, Inventors: Shilpa Srivastava, Pavni Sharma, Muskan Bhardwaj, Priyanshi Jhalanai
17
Application Number: 202211076547, Application Status: Published, Year: 2022-23, Title of Invention: Automatic Fire Detector and Extinguisher Robot, Inventors: Md. Shahbaz Alam, Vishal Sharma, Vishwajeet Sharan Singh, Vishal Singh
18
Application Number: 202211076572, Application Status: Published, Year: 2022-23, Title of Invention: A wearable vocalizer based on hand gestures for dumb people, Inventors: Ankit Jha, Akash Maurya, Aman Singh, Dr. Himani Garg
Patent (2018-21)

1
Application Number: 01911051745, Application Type: Ordinary, Application Status: publish Date of Filing: 2019-12-13, Date of Publication: 2020-07-17, Priority Date: 0000-00-00, Title of Invention: DEVICE AND METHOD FOR DETECTING MULTI-LAYER MOISTURE CONTENT OF SOIL USING MULTI-LAYER SOIL MOISTURE SENSOR, Field of Invention: Mechanical Engineering, E-Mail: , Alternate E-Mail: , Request Examination Date: 0000-00-00
1
Application Number: 01911051745, Application Type: Ordinary, Application Status: publish Date of Filing: 2019-12-13, Date of Publication: 2020-07-17, Priority Date: 0000-00-00, Title of Invention: DEVICE AND METHOD FOR DETECTING MULTI-LAYER MOISTURE CONTENT OF SOIL USING MULTI-LAYER SOIL MOISTURE SENSOR, Field of Invention: Mechanical Engineering, E-Mail: , Alternate E-Mail: , Request Examination Date: 0000-00-00
2
Application Number: 01911010265, Application Type: Ordinary, Application Status: publish Date of Filing: 2019-03-15, Date of Publication: 2020-07-17, Priority Date: 0000-00-00, Title of Invention: AN AEROFOIL FAN BLADE AND FANS WITH AEROFOIL BLADES, Field of Invention: Mechanical Engineering, E-Mail: patent@ralegal.co.in, Alternate E-Mail: deepak@iprmovers.com, Request Examination Date: 0000-00-00
3
Application Number: 02011027343, Application Type: Ordinary, Application Status: publish Date of Filing: 2020-03-07, Date of Publication: 2020-08-14, Priority Date: 0000-00-00, Title of Invention: Method for Restriction of Door opening in Motor Vehicle, Field of Invention: Automobile, E-Mail: pooja@innoveintellects.com, Alternate E-Mail: , Request Examination Date: 0000-00-00
4
Application Number: 02011030240, Application Type: Ordinary Application, Application Status: publish Date of Filing: 2020-07-16, Date of Publication: 2020-10-16, Priority Date: 0000-00-00, Title of Invention: System and Method for Robot Assisting Patient, Field of Invention: Bio-Medical Engineering, E-Mail: smartpatenting@gmail.com, Alternate E-Mail: , Request Examination Date: 0000-00-00
5
Application Number: 01811033651, Application Type: complte file, Application Status: publish Date of Filing: 2018-09-07, Date of Publication: 2020-03-13, Priority Date: 0000-00-00, Title of Invention: DEVICE AND METHOD FOR DETECTING POSITION OF A MACHINE , Field of Invention: Electronics, E-Mail: , Alternate E-Mail: , Request Examination Date: 0000-00-00
6
Application Number: 01811022492, Application Type: ORDINARY APPLICATION , Application Status: publish Date of Filing: 2018-06-15, Date of Publication: 2020-12-20, Priority Date: 0000-00-00, Title of Invention: APPARATUS AND METHOD FOR MONITORING AND REPORTING A HEALTH CONDITION OF A WATER PURIFYING SYSTEM , Field of Invention: COMMUNICATION , E-Mail: , Alternate E-Mail: , Request Examination Date: 0000-00-00
7
Application Number: 02011018475, Application Type: ORDINARY APPLICATION, Application Status: publish Date of Filing: 2020-04-03, Date of Publication: 2020-08-07, Priority Date: 0000-00-00, Title of Invention: SYSTEMS AND METHODS FOR CALIBRATION OF PH METER, Field of Invention: Physics, E-Mail: smartpatenting@gmail.com, Alternate E-Mail: smartpatenting@gmail.com, Request Examination Date: 0000-00-00
8
Application Number: 01911046297, Application Type: ORDINARY APPLICATION, Application Status: publish Date of Filing: 2019-11-14, Date of Publication: 2020-07-17, Priority Date: 0000-00-00, Title of Invention: DEVICE FOR MEASURING POWER SUPPLIED TO BASE TRANSCEIVER STATION FROM PLURALITY OF POWER SOURCES , Field of Invention: ELECTRICAL, E-Mail: , Alternate E-Mail: , Request Examination Date: 0000-00-00
9
Application Number: 02011026643, Application Type: ORDINARY APPLICATION, Application Status: publish Date of Filing: 2020-06-24, Date of Publication: 2020-08-07, Priority Date: 0000-00-00, Title of Invention: SMART DIGITAL COLORIMETER, Field of Invention: Physics, E-Mail: , Alternate E-Mail: , Request Examination Date: 0000-00-00
10
Application Number: 02011050691, Application Type: Ordinary, Application Status: publish Date of Filing: 2020-11-21, Date of Publication: 2020-12-04, Priority Date: 0000-00-00, Title of Invention: SYSTEM AND METHOD FOR TRANSLATION OF ONE OR MORE GESTURES INTO A FIRST LANGUAGE, Field of Invention: Electronics, E-Mail: , Alternate E-Mail: , Request Examination Date: 0000-00-00
11
Application Number: 02111002398, Application Type: Ordinary Application, Application Status: publish Date of Filing: 2021-01-19, Date of Publication: 2021-01-19, Priority Date: 0000-00-00, Title of Invention: IOT SENSOR BASED CONTROL OF AN AIR CIRCULATION FAN, Field of Invention: PHYSICS, E-Mail: ranjeeta.yadav@abes.ac.in, Alternate E-Mail: ranjeeta.yadav@abes.ac.in, Request Examination Date: 0000-00-00
12
Application Number: 02111060093, Application Type: Ordinary, Application Status: publish Date of Filing: 2021-12-12, Date of Publication: 2021-12-31, Priority Date: 2021-12-31, Title of Invention: RFID BASED SCRAPPED VEHICLE DETECTION, Field of Invention: Communication, E-Mail: geetanjali.raj@abes.ac.in, Alternate E-Mail: geetanjali.raj@abes.ac.in, Request Examination Date: 0000-00-00
13
Application Number: 02111059164, Application Type: Ordinary, Application Status: publish Date of Filing: 2021-12-18, Date of Publication: 2021-12-31, Priority Date: 0000-00-00, Title of Invention: ATTENDANCE MONITORING SYSTEM EMPLOYING UHF, Field of Invention: Electronics, E-Mail: geetanjali.raj@abes.ac.in, Alternate E-Mail: geetanjali.raj@abes.ac.in, Request Examination Date: 0000-00-00
Publications details for CAY (2024-25)

1
Neha Singh Raghuvanshi, Arpita Johri, Mudit Saxena, Ashish Kumar Gupta, Amit Choudhari, Abhishek Kumar, Avinash Kumar, Ashwani Kumar, (1st Edition); "Chapter 13: Thermally Stable Lubricants, Performance Characterization of Lubricants", Edited By Abhishek Kumar, Avinash Kumar, Ashwani Kumar, Routledge, Taylor & Francis Group.
2
Neha Singh Raghuvanshi, Arpita Johari, Mudit Saxena, Ashish Kumar Gupta, Abhishek Kumar, Ashwani Kumar, Avinash Kumar, Ashutosh Gupta, (1st Edition); "Chapter 04: Eco-friendly Lubricants, Performance Characterization of Lubricants", Edited By Abhishek Kumar, Avinash Kumar, Ashwani Kumar, Routledge, Taylor & Francis Group.
3
Uma Sharma, Deeksha Sharma, Pooja Pathak, Sanjay Kumar Singh, Pushpanjali Singh, (2024); "Medical Imaging Using Machine Learning and Deep Learning: A Survey", Prediction in Medicine: The Impact of Machine Learning on Healthcare 1: 44, Bentham Science Publishers. https://doi.org/10.2174/9789815305128124010006
Publications details for CAY (2022-23)

1
Yadav, R., Yadav, S., (2023); "IoT-Based Efficient and Complete Management on Street Parking", In: Low Power Architectures for IoT Applications. Springer Tracts in Electrical and Electronics Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-99-0639-0_7
2
Ladislau Matekovits, Binod Kumar Kanaujia, Jugul Kishor, Surendra Kumar Gupta, (2022); "Printed Antennas for 5G Networks", PoliTO Springer Series (PTSS), Springer.
Publications details for CAY (2019-21)

1
Navneet Sharma, Himani Garg, Shilpa Srivastava, (2019); "Enhancement of Trunking Efficiency and Analysis of Cell Capacity in CDMA" , Sri Niwas Singh · Fushuan Wen , Springer, Book TitleAdvances in System Optimization and Control 2019, Singapore, 15 ISBN978-981-13-0664-8
2
Harshit Srivastava, Usha Tiwari, Pallavie Tyagi, (2021); "" Bandwidth and Gain Enhancement of Circular MPA Using Twin-Layer Stacked Antenna."", Saad Mekhilef, Margarita Favorskaya, R. K. Pandey, Rabindra Nath Shaw, Springer, Book Title"Innovations in Electrical and Electronic Engineering" 1, Singapore , 12 ISBN978-981-16-0748-6
3
Priyanka Bhardwaj, Manidipa Roy, Sanjay kumar Singh, (2021); "Simulation and Design of Mach–Zehnder Interferometer" , Springer, Springer, Book TitleMicroelectronics and telecommunication enmgineering 1, India, 17 ISBN978-981-16-8720-4
4
Priyanka Bhardwaj, Manidipa Roy, Sanjay kumar Singh, (2021); "Atmospheric Turbulence Effects on Bit Error Rate in Lognormal and Negative Exponential Channel in FSO Link" , Springer, Springer, Book TitleMicroelectronics and telecommunication engineering 1, India, 10 ISBN978-981-16-8720-4
1
Ladislau Matekovits, Binod Kumar Kanaujia, Jugul Kishor, Surendra Kumar Gupta, (2022) "Printed Antennas for 5G Networks", https://link.springer.com/book/10.1007/978-3-030-87605-0#editorsandaffiliations, 1, Springer, 15-03-2022, isbn: 978-3-030-87604-3,page no: 371;
Consultancty

Govt. funded Projects
Title of Project Duration of the Project Objective Session Amount Sanctioned Funding Agency Date of Receipt of Amount Amount Received on Date Remarks Name of Investigator
Fellowship Training Scheme 1 month Fellowship Training 2023-24 Eur 2000 The Malta Council for Science and Technology, European Commission 11-04-2024 Eur 2000 Completed Dr. Rohit Sharma
Release of funds for organizing International Conference ISCEIET 2023 3 months Funds to organize conference ICSEIET 2023-24 INR 1,50,000 MeitY 14-07-2023 INR 1,50,000 Completed Prof. (Dr.) Sanjay Kumar Singh
Release of funds for organizing International Conference ISCEIET 2023 3 months Funds to organize conference ICSEIET 2023-24 INR 1,50,000 SERB 02-06-2023 INR 1,50,000 Completed Prof.(Dr.) Priyanka Bhardwaj
Modernization of Microwave engineering lab for Design, Measurement and testing facility for RF Applications 2 years To develop lab with Advanced level RF and Microwave Simulation, Fabrication and Testing Facility 2019-20 14,00,000 AICTE 14-01-2020 11,20,000 Completed Prof. (Dr.) Sanjay Kumar Singh
Modernization of Electronics Design Lab 2 years To develop lab with Advanced level VLSI based Simulation Facility for students of UG and PG level 2018-19 12,35,000 AICTE 03-04-2019 9,88,000 Completed Prof. (Dr.) Sanjay Kumar Singh
Research Project-Development of Energy Efficient Air pollution monitoring System using network traffic adaptive WSN. 2 years To design efficient air pollution monitoring system with advanced NI based hardware 2018-19 5,00,000 AKTU, Lucknow 13-05-2019 4,75,000 Completed Prof. (Dr.) Sanjay Kumar Singh
Advanced VLSI Design and Applications with hands-on CADENCE Tools 6 months To organize STTP on Advanced VLSi design and applications with hands on Cadence Tools 2018-19 4,00,000 STTP under AQIS, AICTE 05-03-2020 4,00,000 Completed Prof. (Dr.) Sanjay Kumar Singh

Title: Fellowship Training Scheme

Duration: 1 month

Objective: Fellowship Training

Session: 2023-24

Amount Sanctioned: Eur 2000

Funding Agency: The Malta Council for Science and Technology, European Commission

Date of Receipt: 11-04-2024

Amount Received: Eur 2000

Remarks: Completed

Investigator: Dr. Rohit Sharma

Title: Release of funds for organizing International Conference ISCEIET 2023

Duration: 3 months

Objective: Funds to organize conference ICSEIET

Session: 2023-24

Amount Sanctioned: INR 1,50,000

Funding Agency: MeitY

Date of Receipt: 14-07-2023

Amount Received: INR 1,50,000

Remarks: Completed

Investigator: Prof. (Dr.) Sanjay Kumar Singh

Title: Release of funds for organizing International Conference ISCEIET 2023

Duration: 3 months

Objective: Funds to organize conference ICSEIET

Session: 2023-24

Amount Sanctioned: INR 1,50,000

Funding Agency: SERB

Date of Receipt: 02-06-2023

Amount Received: INR 1,50,000

Remarks: Completed

Investigator: Prof. (Dr.) Priyanka Bhardwaj

Title: Modernization of Microwave engineering lab for Design, Measurement and testing facility for RF Applications

Duration: 2 years

Objective: To develop lab with Advanced level RF and Microwave Simulation, Fabrication and Testing Facility for students of UG, PG level

Session: 2019-20

Amount Sanctioned: INR 14,00,000

Funding Agency: AICTE

Date of Receipt: 14-01-2020

Amount Received: INR 11,20,000

Remarks: Completed

Investigator: Prof. (Dr.) Sanjay Kumar Singh

Title: Modernization of Electronics Design Lab

Duration: 2 years

Objective: To develop lab with Advanced level VLSI based Simulation Facility for students of UG and PG level

Session: 2018-19

Amount Sanctioned: INR 12,35,000

Funding Agency: AICTE

Date of Receipt: 03-04-2019

Amount Received: INR 9,88,000

Remarks: Completed

Investigator: Prof. (Dr.) Sanjay Kumar Singh

Title: Research Project-Development of Energy Efficient Air pollution monitoring System using network traffic adaptive WSN

Duration: 2 years

Objective: To design efficient air pollution monitoring system with advanced NI based hardware

Session: 2018-19

Amount Sanctioned: INR 5,00,000

Funding Agency: AKTU, Lucknow

Date of Receipt: 13-05-2019

Amount Received: INR 4,75,000

Remarks: Completed

Investigator: Prof. (Dr.) Sanjay Kumar Singh

Title: Advanced VLSI Design and Applications with hands-on CADENCE Tools

Duration: 6 months

Objective: To organize STTP on Advanced VLSI design and applications with hands-on Cadence Tools

Session: 2018-19

Amount Sanctioned: INR 4,00,000

Funding Agency: STTP under AQIS, AICTE

Date of Receipt: 05-03-2020

Amount Received: INR 4,00,000

Remarks: Completed

Investigator: Prof. (Dr.) Sanjay Kumar Singh

Consultancy Projects

]
Title of Project Duration of the Project Session Amount Sanctioned Funding Agency Date of Completion Name of Investigator
Thermal Management System for Forging Industry 04 Weeks 2023-24 Rs. 81,184 Mind Task Technologies Pvt. Ltd. 20-08-2024 Dr. Rajnesh Kumar Singh
Firmware for a 2.5kw Induction Heating System 20 Weeks 2023-24 Rs. 3,48,100 Gola Electronics N/A Dr. Rajnesh Kumar Singh
Smart Air Curtain System 04 Weeks 2023-24 Rs. 95,000 Mitzvah Engg. Pvt. Ltd. 09-09-2024 Dr. Rajnesh Kumar Singh
Vehicle Tracking System (NavIC) 08 Weeks 2022-23 Rs. 1,16,383 Xovian/Mind Task Technologies Pvt. Ltd. 17-07-2023 Dr. Rajnesh Kumar Singh
CII Majestic Skill Will Lead Programme (Event) 15 Days 2022-23 Rs. 60,000 CII and Majestic Group 18-10-2024 Dr. Rajnesh Kumar Singh
Prosthetic Hand 10 Weeks 2022-23 Rs. 3,86,568 Autosys Technologies & Klerix Medtek 30-11-2024 Dr. Rajnesh Kumar Singh
Testing of novel hexagon shaped micro trip antenna 6 months 2021-22 4000 GGSIP University, Delhi 17-02-2022 Prof.(Dr.) Sanjay Kumar Singh
Fabrication and testing of 2.4GHz Sector and semi-circular Antenna 4 months 2021-22 4000 AKTU 27-12-2021 Prof.(Dr.) Sanjay Kumar Singh
Testing of pentagon shaped patch antenna 1 week 2021-22 3500 GGSIP University, Delhi 18-10-2021 Prof.(Dr.) Sanjay Kumar Singh
Design of Multiband Antenna using DRA 1 month2020-21 5000 GGSIP University, Delhi 30-06-2021 Prof.(Dr.) Sanjay Kumar Singh
Design of Multiband Resonator Antenna using Dielectric Resonator 1 month 2020-21 4000 GGSIP University, Delhi 16-05-2021 Prof.(Dr.) Sanjay Kumar Singh
Fabrication of Antenna Array 1 week 2020-21 944 MJP Rohilkhand University, Uttar Pradesh 11-02-2021 Prof.(Dr.) Sanjay Kumar Singh
An airfoil fan blade and fan with aerofoil Blades 2 years 2019-20 1,86,196 Havells India Pvt ltd. 16-01-2020 Dr. Rajnesh Kumar Singh
Mechanical Assistant Arm for Wheel Positioning. 3 months 2019-20 32,477 ACE Honda, Noida 27-12-2019 Dr. Rajnesh Kumar Singh
Digital pH meter 1 year 2018-19 7500 Aim Electronics and Scientific Co. 24-05-2019 Prof.(Dr.) Sanjay Kumar Singh
Digital Colorimeter 1 year 2018-19 7500 Aim Electronics and Scientific Co. 24-05-2019 Prof.(Dr.) Sanjay Kumar Singh
Hinges/Rotary Handle Operating Life Testing Machine. 1 year 2018-19 6,40,465 LGF Sysmac 28-02-2019 Dr. Rajnesh Kumar Singh
ACDB 1 year 2018-19 5907 NRR Power Pvt. Ltd. 30-10-2018 Prof.(Dr.) Sanjay Kumar Singh
AJB 15 KW 1 year 2018-19 5907 RED Faridabad 30-10-2018 Prof.(Dr.) Sanjay Kumar Singh

Department Infrastructure


Name

Count

Centre of Excellence (CoE) (3 Funded under MODROB, VRPS)

5

Advanced Labs

4

Curriculum Labs (1 Funded under MODROB)

11

Industry Associations of ECE labs and CoE - Curriculum Labs

10

Industry Associations of ECE labs and CoE - Advanced Labs

4

Industry Associations of ECE labs and Centre of Excellence (CoE)

5

Counselling room

1

Class and Tutorial Rooms

Well-equipped classroom and tutorial rooms with Podium, Black/white board, LCD projectors, Internet, Audio Facility, AC Classrooms.

Departmental Library

Includes Projectors, AC, White Board, Table, Chairs, and all related books.

Faculty Cabins

All faculty cabins have AC, Internet Access, News Board, chairs, and table.

Curriculum Labs-AKTU

Lab Name

Lab Location

Network Analysis & Synthesis Lab

BH-101 , Bhaba Block, First Floor

Electronics Engineering Lab

BH-115, Bhaba Block, First Floor

Integrated Circuit Lab/Analog Circuit Lab/Electronic devices Lab

BH-201, Bhaba Block, Second Floor

Communication Engineering Lab/Digital Communication Lab/Centre of Excellence for Microwave & Antenna Design

BH-211, Bhaba Block, Second Floor

Electronics Engineering Lab

BH-216, Bhaba Block, Second Floor

Electronics Simulation Lab

BH-301, Bhaba Block, Third Floor

Project Lab

BH-310, Bhaba Block, Third Floor

VLSI Design Lab-1

BH-315, Bhaba Block, Third Floor

Embedded System & IOT Lab/ Digital System Design Lab

RJ-210, Ramanujan Block, Second Floor

Microprocessor & Microcontroller Lab/Virtual Instrumentation/VLSI Design Lab-II

RJ-003, Ramanujan Ground Floor

Signal & System Lab/DSP Lab/Control System Lab

RJ-006, Ramanujan Ground Floor

Centre of Excellence Lab

Name of COE

Location

Optical, Microwave and Antenna design

BH-211, Bhaba Block, Second Floor

VLSI Design

BH-315, Bhaba Block, Third Floor

Labs


Faculty Achievements


Prof. (Dr) Priyanka Bhardwaj is nominated and selected as an investigator member of an International Project approved under the Ministry of Education, Kingdom of Saudi Arabia, King Khalid University, Deanship of Scientific Research.This is the first International Project under the Ministry of Education with our faculty member as a part of the project proposal and investigator and ABESEC.

The total grant sanctioned for the project is 150000 Saudi Riyal (Rs 3102740.44) and the duration is 12 months.


Dr. Ritu Agarwal of the ECE department has been serving as a reviewer of the Journal of Optics (Springer).


Dr. Navneet Sharma and Mr. Mudit Saxena of the ECE department won best paper award in UPCON 2024 held at Shri Ram Swaroop College of Engineering and Management, Lucknow in 2023.


Dr. Navneet Sharma has received the prestigious Distinguished Scientist Award in the field of BioMedical Electromagnetics from ICSRR, New Delhi in 2023.


Ms. Ranjeeta Yadav, Ms Pooja Pathak and Ms. Anupam of the ECE department had done 30 Hrs. certification course on Embedded and IoT from JKSD Infotech Pvt. Ltd in 2023.


Dr. Shivam Singh of the ECE department is listed in Stanford/Elsevier Top 2% scientist list 2024.


Dr. Jugul Kishore Gupta of the ECE department has been serving as a reviewer of the International Journal of Communication Systems and received certificate for reviewing 3 manuscripts in 2023.

Dr. Jugul Kishore Gupta of the ECE department has been serving as a reviewer of ETRI journal and received certificate for reviewing manuscripts in 2023.

Dr. Jugul Kishore Gupta of the ECE department has been serving as a reviewer of HINDAWAI portfolio of journal and received certificate for reviewing manuscripts in 2023.

Dr. Jugul Kishore Gupta of ECE department has received a certificate of appreciation for serving as a resource person during 5 days International Online Faculty Development Programme on “Advancement in RF, Microwave, Antenna and 5G Application” organized by the Department of Electronics and Communication Engineering, Atria Institute of Technology, Bangalore, in association with MTT/AP society Bangalore Joint Chapter, Mathworks and Keysight (Knowledge Partner), and IEEE Atria Student Chapter during 27th-31st March 2023

Student Achievements


College Toppers

Session Year University Roll No. Name Of Student Percentage Scored / YGPA College Level Rank
2022-23 FINAL 1900320310057 DEVANSHI CHAUHAN
9.19
1
2022-23 FINAL 1900320310132 SAKSHI GUPTA
9.05
2
2022-23 THIRD 2000320310032 ANSHIKA SINGH
8.58
1
2022-23 THIRD 2000320310102 MANVI PANKAJ
8.53
2
2022-23 SECOND 2100320310064 KAVYA KUMAR TAYAL
8.19
1
2022-23 SECOND 2100320310130 TANU RAI
8.17
2
2021-22 FINAL 1803231104 PRATIBHA SINGH
8.96
1
2021-22 FINAL 1803231086 MAHARANA PRATAP SINGH
8.92
2
2021-22 THIRD 21900320310057 DEVANSHI CHAUHAN
8.82
1
2021-22 THIRD 1900320310132 SAKSHI GUPTA
8.61
2
2021-22 SECOND 2000320310108 NAVEEN TRIPATHI
8.51
1
2021-22 SECOND 2000320310192 VIDUSHI GUPTA
8.42
2
2020-21 FINAL 1703231102 NANDINI TANDON
9.19
1
2020-21 FINAL 1703231097 MAYANK SINHA
9.1
2
2020-21 THIRD 1803231139 SANSKRITI SRIVASTAVA
9.05
1
2020-21 THIRD 1803231077 KAUMUDI TYAGI
9.03
2
2020-21 SECOND 1900320310057 DEVANSHI CHAUHAN
9.16
1
2020-21 SECOND 1900320310132 SAKSHI GUPTA
9.09
2
2019-20 FINAL 1603231111 Nandini Mittal
9.05
1
2019-20 FINAL 1603231139 Rashika Shukla
9.03
2
2019-20 THIRD 1703231102 Nandini Tandon
9.25
1
2019-20 THIRD 1703231101 Nandini Chaudhary
9.15
2
2019-20 SECOND 1803231154 Shivani Singh
8.9
1
2019-20 SECOND 1803231104 Pratibha Singh
8.88
2
2018-19 FINAL 1503231089 Ishita Singhal
83.46%
1
2018-19 FINAL 1503231226 Tanisha Agarwal
82.96%
2
2018-19 THIRD 1603231139 Rashika Shukla
90.85%
1
2018-19 THIRD 1603231117 Nishtha Ghai
90.05%
2
2018-19 SECOND 1703231102 Nandini Tandon
91.05%
1
2018-19 SECOND 1703231153 Shreyansh Agarwal
90.60%
2
2017-18 FINAL 1403231236 Vikash Singh Yadav
85.42%
1
2017-18 FINAL 1403231084 Gauri Pandey
83.72%
2
2017-18 THIRD 1503231067 Deepali Gupta
83.40%
1
2017-18 THIRD 1503231089 Ishita Singhal
83.00%
2
2017-18 SECOND 1603231134 Preeti Anand
87.85%
1
2017-18 SECOND 1603231139 Rashika Shukla
87.35%
2
2016-17 FINAL 1303231031 Ankita Garg
84.96%
1
2016-17 FINAL 1303231162 SonaliKa Maurya
82.06%
2
2016-17 THIRD 1403231236 Vikash Singh Yadav
82.95%
1
2016-17 THIRD 1403231084 Gauri Pandey
82.05%
2
2016-17 SECOND 1503231089 Ishita Singhal
82.95%
1
2016-17 SECOND 1503231097 Kishan Kumar
82.30%
2
2015-16 FINAL 1203231026 Amit Chaudhary
83.82%
1
2015-16 FINAL 1203231166 Sakshi Singh
83.49%
2
2015-16 THIRD 1303231031 Ankita Garg
86.10%
1
2015-16 THIRD 1303231040 Ashish Kesharwani
83.30%
2
2015-16 SECOND 1403231236 Vikash Singh Yadav
89.00%
1
2015-16 SECOND 1403231084 Gauri Pandey
86.70%
2
Student's Name Session / Year Percentage Scored / YGPA
DEVANSHI CHAUHAN 2022-23 / FINAL 9.19
SAKSHI GUPTA 2022-23 / FINAL 9.05
ANSHIKA SINGH 2022-23 / THIRD 8.58
MANVI PANKAJ 2022-23 / THIRD 8.53
KAVYA KUMAR TAYAL 2022-23 / SECOND 8.19
TANU RAI 2022-23 / SECOND 8.17
PRATIBHA SINGH 2021-22 / FINAL 8.96
MAHARANA PRATAP SINGH 2021-22 / FINAL 8.92
DEVANSHI CHAUHAN 2021-22 / THIRD 8.82
SAKSHI GUPTA 2021-22 / THIRD 8.61
NAVEEN TRIPATHI 2021-22 / SECOND 8.51
VIDUSHI GUPTA 2021-22 / SECOND 8.42
NANDINI TANDON 2020-21 / FINAL 9.19
MAYANK SINHA 2020-21 / FINAL 9.1
SANSKRITI SRIVASTAVA 2020-21 / THIRD 9.05
KAUMUDI TYAGI 2020-21 / THIRD 9.03
DEVANSHI CHAUHAN 2020-21 / SECOND 9.16
SAKSHI GUPTA 2020-21 / SECOND 9.09
Nandini Mittal 2019-20 / FINAL 9.05
Rashika Shukla 2019-20 / FINAL 9.03
Nandini Tandon 2019-20 / THIRD 9.25
Nandini Chaudhary 2019-20 / THIRD 9.15
Shivani Singh 2019-20 / SECOND 8.9
Pratibha Singh 2019-20 / SECOND 8.88
Ishita Singhal 2018-19 / FINAL 83.46%
Tanisha Agarwal 2018-19 / FINAL 82.96%
Rashika Shukla 2018-19 / THIRD 90.85%
Nishtha Ghai 2018-19 / THIRD 90.05%
Nandini Tandon 2018-19 / SECOND 91.05%
Shreyansh Agarwal 2018-19 / SECOND 90.60%
Vikash Singh Yadav 2017-18 / FINAL 85.42%
Gauri Pandey 2017-18 / FINAL 83.72%
Deepali Gupta 2017-18 / THIRD 83.40%
Ishita Singhal 2017-18 / THIRD 83.00%
Preeti Anand 2017-18 / SECOND 87.85%
Rashika Shukla 2017-18 / SECOND 87.35%
Ankita Garg 2016-17 / FINAL 84.96%
SonaliKa Maurya 2016-17 / FINAL 82.06%
Vikash Singh Yadav 2016-17 / THIRD 82.95%
Gauri Pandey 2016-17 / THIRD 82.05%
Ishita Singhal 2016-17 / SECOND 82.95%
Kishan Kumar 2016-17 / SECOND 82.30%
Amit Chaudhary 2015-16 / FINAL 83.82%
Sakshi Singh 2015-16 / FINAL 83.49%
Ankita Garg 2015-16 / THIRD 86.10%
Ashish Kesharwani 2015-16 / THIRD 83.30%
Vikash Singh Yadav 2015-16 / SECOND 89.00%
Gauri Pandey 2015-16 / SECOND 86.70%

UNIVERSITY TOPPERS for SESSION 2022-23

STUDENT NAME BRANCH AKTU RANK CGPA AWARD
Ms. DEVANSHI CHAUHAN(1900320310057) B.Tech. ECE 6th
9.19
Chairman Silver Medal & Rs 21,000
STUDENT NAME BRANCH AKTU RANK/CGPA AWARD
DEVANSHI CHAUHAN B.Tech. ECE 6th/9.19 Chairman Silver Medal & Rs 21,000>

Extra curricular Activities

Name of the Award/Medal Sports/ Cultural/Technical Name of the student
1st position in Battle of Bands at the annual cultural fest of Jaipuria Institute of Management, held on December 21, 2024 Cultural Mr. Mrigank Vikram Pal
Mr. Anshuman Parashar
SIH Grand Finale Runner-Ups Technical Ms. Tanya Mr. Tanmay Nayak Ms. Vidushi Ms. Swati Gupta Mr Sarthak Sharma Mr. Utkarsh Kumar
Third prize in solo dance Competition at Jaipuria Institute of Management, Indirapuram held on December 21, 2024 Cultural Mr. Dripendra Pratap Gautam
Won Silver medal in Relay Race at AKTU sports Fest (Zonal Level) Sports Shivanshu Yadav
Won Silver medal in 100mts at AKTU sports Fest (Zonal Level) Sports Priyam Pal
Won Gold Medal in Javelin Throw at AKTU sports Fest (Zonal Level) Sports Dhriti Juneja
Secured 100% and was in 1% topper in NPTEL online certification of System Design Through Verilog Technical Nikhil Mandoli
SWon Silver medal in Cricket at HBTU Kanpur Sports Mr. Akash Mr. Deepanshu Mr. Chetan
Won Silver medal in cross country at HBTU Kanpur Sports Mr. Gaurav Chaudhary
Consolation prize Technophilia: The technical project expo at DVSIET Meerut Technical Ms. Shagun Tyagi Mr. Utkarsh Pandey Ms. Shubhangam
2nd Position in Intercollege Annual Sports Fest RANN’24 at KIET Sports Mr. Shivam Singh
1st Position in Institution Idea Competition held at ABESEC from 9-15 Jan 2024 Technical Ms. Kanika Agarwal
Best Idea Award in Drone workshop held at ABESEC Technical Mr. Aditya Singh
Best Idea Award in Drone workshop held at ABESEC Technical Mr. Anurag Chauhan
2nd Position in Digital Product design (DPD) in Tech Pravah 2022-23 at ABESEC Technical Mr. Rohan Chauhan /td>
1st position in Duo singing in MANTHAN Held at IILM University on 1-2 Dec 2023 Cultural Mr. Mrigank Vikram Pal
1st position in Duo singing in MANTHAN Held at IILM University on 1-2 Dec 2023 Cultural Mr. Anshuman Parashar
2nd position in Battle of Bands in MANTHAN Held at IILM University on 1-2 Dec 2023 Cultural r. Mrigank Vikram Pal
2nd position in Discus throw Sports Anushka Yadav
3rd position in 4x400m Relay Sports Utkarsh Srivastava
2nd position in 4x400m Relay Sports Yati Jaiswal
3rd position in High Jump Sports Kritiyanshi Kushvanshi
2nd position in 4x400m Relay Sports Kritiyanshi Kushvanshi
3rd position in 4x100m Relay Sports Utkarsh Srivastava
3rd position in 4x100m Relay Sports Shailendra Kumar
1st position in Battle of Bands Cultural Shadaj Tiwari
1st position in Band Wars Cultural Shadaj Tiwari
1st position in Poster making Cultural Swati Khantwal
1st position in Poster making Cultural Swati Kushwaha
2nd position in 200m Athletics Sports Anushka Yadav
1st Position in Long Jump Sports Shailendra Kumar
3rd Position in 4X100m Relay Sports Shailendra Kumar
1st position in 4X100m Relay Sports Anushka Yadav
3rd position in College League Cultural Keyuri Gupta
1st Position in Football Sports Anirudh
3rd position in 4X400m Relay Sports Anushka Yadav
1st position in 4X100m Relay Sports Anushka Yadav
3rd position in 100m Race Sports Anushka Yadav
1st position in 200m Race Sports Anushka Yadav
1st position in 4X100m Girls Relay Race Sports Anushka Yadav
1st position in 4X100m Girls Relay Race Sports Anushka Yadav
2nd position in 100m Race Sports Anushka Yadav
1st Position in 100m Race Sports Shailendra Kumar
1st Position in Long Jump Sports Shailendra Kumar
Name of the Award/Medal Sports/ Cultural Name of the student
1st position in Battle of Bands at the annual cultural fest of Jaipuria Institute of Management, held on December 21, 2024 Cultural Mr. Mrigank Vikram Pal
Mr. Anshuman Parashar
SIH Grand Finale Runner-Ups Technical Ms. Tanya Mr. Tanmay Nayak Ms. Vidushi Ms. Swati Gupta Mr Sarthak Sharma Mr. Utkarsh Kumar
Third prize in solo dance Competition at Jaipuria Institute of Management, Indirapuram held on December 21, 2024 Cultural Mr. Dripendra Pratap Gautam
Won Silver medal in Relay Race at AKTU sports Fest (Zonal Level) Sports Shivanshu Yadav
Won Silver medal in 100mts at AKTU sports Fest (Zonal Level) Sports Priyam Pal
Won Gold Medal in Javelin Throw at AKTU sports Fest (Zonal Level) Sports Dhriti Juneja
Secured 100% and was in 1% topper in NPTEL online certification of System Design Through Verilog Technical Nikhil Mandoli
SWon Silver medal in Cricket at HBTU Kanpur Sports Mr. Akash Mr. Deepanshu Mr. Chetan
Won Silver medal in cross country at HBTU Kanpur Sports Mr. Gaurav Chaudhary
Consolation prize Technophilia: The technical project expo at DVSIET Meerut Technical Ms. Shagun Tyagi Mr. Utkarsh Pandey Ms. Shubhangam
2nd Position in Intercollege Annual Sports Fest RANN’24 at KIET Sports Mr. Shivam Singh
1st Position in Institution Idea Competition held at ABESEC from 9-15 Jan 2024 Technical Ms. Kanika Agarwal
Best Idea Award in Drone workshop held at ABESEC Technical Mr. Aditya Singh
Best Idea Award in Drone workshop held at ABESEC Technical Mr. Anurag Chauhan
2nd Position in Digital Product design (DPD) in Tech Pravah 2022-23 at ABESEC Technical Mr. Rohan Chauhan /td>
1st position in Duo singing in MANTHAN Held at IILM University on 1-2 Dec 2023 Cultural Mr. Mrigank Vikram Pal
1st position in Duo singing in MANTHAN Held at IILM University on 1-2 Dec 2023 Cultural Mr. Anshuman Parashar
2nd position in Battle of Bands in MANTHAN Held at IILM University on 1-2 Dec 2023 Cultural r. Mrigank Vikram Pal
2nd position in Discus throw Sports Anushka Yadav
3rd position in 4x400m Relay Sports Utkarsh Srivastava
2nd position in 4x400m Relay Sports Yati Jaiswal
3rd position in High Jump Sports Kritiyanshi Kushvanshi
2nd position in 4x400m Relay Sports Kritiyanshi Kushvanshi
3rd position in 4x100m Relay Sports Utkarsh Srivastava
3rd position in 4x100m Relay Sports Shailendra Kumar
1st position in Battle of Bands Cultural Shadaj Tiwari
1st position in Band Wars Cultural Shadaj Tiwari
1st position in Poster making Cultural Swati Khantwal
1st position in Poster making Cultural Swati Kushwaha
2nd position in 200m Athletics Sports Anushka Yadav
1st Position in Long Jump Sports Shailendra Kumar
3rd Position in 4X100m Relay Sports Shailendra Kumar
1st position in 4X100m Relay Sports Anushka Yadav
3rd position in College League Cultural Keyuri Gupta
1st Position in Football Sports Anirudh
3rd position in 4X400m Relay Sports Anushka Yadav
1st position in 4X100m Relay Sports Anushka Yadav
3rd position in 100m Race Sports Anushka Yadav
1st position in 200m Race Sports Anushka Yadav
1st position in 4X100m Girls Relay Race Sports Anushka Yadav
1st position in 4X100m Girls Relay Race Sports Anushka Yadav
2nd position in 100m Race Sports Anushka Yadav
1st Position in 100m Race Sports Shailendra Kumar
1st Position in Long Jump Sports Shailendra Kumar

Gate/GRE/CAT or Other Central/State exam rankers

Year Exam Student Name
2020-21 GATE Utpal Kr. Tiwari
Govind Sharma
Vikas Kumar
Akshay Mishra
2019-20 GATE Govind Sharma
Akshay Mishra
Sumit Agrahari
Rishabh Pandey
IELET Aiman Rehman
2018-19 GATE Abhishek Tiwari
Raj Singh
Ishita Singhal
Piyush Ranjan
GRE Ayush Giri
2017-18 GATE Prashathi Sahu
Priya Katiyar
Shivangi Dixit
Gaurav Gautam
Dakshta Arora
Vivek Kr. Yadav
Year Exam Student Name
2020-21 GATE Utpal Kr. Tiwari
Govind Sharma
Vikas Kumar
Akshay Mishra
2019-20 GATE Govind Sharma
Akshay Mishra
Sumit Agrahari
Rishabh Pandey
IELET Aiman Rehman
2018-19 GATE Abhishek Tiwari
Raj Singh
Ishita Singhal
Piyush Ranjan
GRE Ayush Giri
2017-18 GATE Prashathi Sahu
Priya Katiyar
Shivangi Dixit
Gaurav Gautam
Dakshta Arora
Vivek Kr. Yadav
Events


International Conference on Springer || NGCCOM-2024 || 5th & 6th-December 2024.

The Department of Electronics and Communication Engineering, ABES Engineering College, Ghaziabad has successfully organized the International Conference on Springer "Next-Generation Communication and Computing" (NGCCOM-2024) on 5th & 6th-December 2024.

Our distinguished guests & keynote speakers were:

Chief Guest:
Prof. (Dr.) S.S. Iyengar (Director, US Army-Funded Center of Excellence, Digital Forensics, Florida International University, Miami, USA)

Guest of Honour:
Dr. Hung Bui (University of Economics, Ho Chi Minh City, Vietnam) and Dr. Sudan Jha (Professor Kathmandu University, Nepal)

International Conference on IEEE || ICSEIST-23 || 14th & 15th September 2023.

Department of Electronics & Communication Engineering, ABES Engineering College, Ghaziabad has organized1st International Conference on Sustainable Emerging Innovations in Engineering and Technology (ICSEIST-23), technically sponsored by IEEE, funded by MeitY & SERB held on September 14 & 15, 2023.

Our distinguished guests & keynote speakers were:

Chief Guest:
Prof. (Dr.) D.S. Chauhan, Pro-Chancellor, GLA Mathura

Guest of Honour:
Prof. (Dr.) B.K. Kaushik, IIT Roorkee


Name of FDP/STTP/STC

Date

Details

AI for SDG's under Unnat Bharat Abhiyaan

18 November 22 November 2024

These five days of STC promoted the positive use of AI for Sustainable Development and investigated on the negative impact of AI on Sustainable Development.

Computer Folio: Hands-on session for online/offline documentation

10 June 14 June 2024

1. Upgrading the quality of non-teaching staff for laboratory and documentation purposes.
2. Augmenting the skills of Office Executives, Lab Attendant, and Technical Staff for several applications in the teaching-learning process.
3. Training the staff for online conferencing tools such as TEAM, ZOOM, SKYPE, MEET, and Office App.
4. Document creation using Word, Excel, and PowerPoint.
5. Applying formulas for sorting, graphing, and analyzing data in MS Excel.

Advancements in Antenna and Wireless Technologies

22 April 26 April 2024

New radio technology
Cognitive radio network
Non-orthogonal multiple access
MIMO antenna and 3D printed antennas
Machine Learning in wireless communication

Research Papers, IPR, and Project Proposal Writing

06 May 11 May 2024

Enhanced understanding of research paper writing techniques, IPR fundamentals, and project proposal development strategies.
Strengthened collaboration and networking among faculty members, paving the way for future interdisciplinary research endeavors.
Empowerment to contribute meaningfully to academic and research communities through high-quality publications and innovative project proposals.

Word Processing with LaTeX

31 October 04 November 2022

Major topics covered during this STTP include
Participants learned the essential codes required to prepare documents in LaTeX.

Faculty Development Program on “An Insight into NBA Accreditation Process” (in online mode)

06-18 December, 2021

Major topics to be covered during this FDP include:
The FDP will address the need to enhance the knowledge about Outcome based Education (OBE), its association with Teaching-Learning Process and NBA accreditation process.
The objective is to build and hone the capacity of faculty to implement effective academic processes.

AICTE Sponsored Six days Online STTP on "Design and Simulation of Semiconductor Devices"

19-24 October, 2020

Major topics to be covered during this STTP include:
Fundamental principles of semiconductor devices.
Wide bandgap compound semiconductors.
Tunnel FETs for low power/RF applications.
Reliability issues in advanced semiconductor devices.
Role of TCAD tools in device design.
Simulating fabrication and device behavior on TCAD tools.

AICTE Sponsored Six days Online STTP on "FPGA Design and Implementation on Xilings tools"

21 -26 September, 2020

Major topics to be covered during this STTP include:
FPGA Design Flow
Hardware Description using Verilog
Verilog for combinational & Sequential Design
Simulation, Synthesis and implementation of designs using Xilinx
Timing constraints
Configuring FPGA and Verifying hardware operation
Demonstration of Xilinx Virtex VC-707.

AICTE Sponsored Six days Online STTP on "Digital ASIC Design using CADENCE EDA tools"

24 -29 August, 2020

Major topics to be covered during this STTP include:
ASIC Design Flow
CADENCE platform for Digital Design
Static Timing Analysis
Functional Simulation using different methods
Synthesis Optimization

AICTE Sponsored Six days Online STTP on "Analog IC Design using CADENCE EDA tools"

27 July -01 Aug, 2020

Major topics to be covered during this STTP include:
Concepts of VLSI
Designing process of Low Power VLSI Circuits
IC Fabrication Technology
Hands-on Laboratory on EDA tools
Silvaco/Synopsys TCAD tools

NITTTR sponsored STC on “Research Oriented Project Work”

24-28 February, 2020

Major topics to be covered during this STC include:
Research Project Management.
Research project funding.
Role of Industries, Institute and Students in project work.
Industrial research project.
Case studies related to Robotics, IOT.
Industry expectations from students.
Open Source software for research.

NITTTR sponsored STC on “Artificial Neural Network and its application”

27-31 January, 2020

Major topics to be covered during this STC include:
Perceptron and back propagation learning.
Deep learning ANNs.
Medical Image Analysis.
Spiking Neural Networks.
ANN programming and Hybridization of soft computing.
Applications and research avenues in the field of ANN.

NITTTR sponsored STTP on Management Issues of Laboratory Workshop Class

04-08 November, 2019

Major topics covered during this STC include:
Management issues of laboratory and workshop class.
Importance of laboratory/workshop class management.
Roles of teachers and technical staff in the management process.

NITTTR sponsored STC on Next Generation Communication

19-23 August, 2019

Major topics to be covered during this STC include:
New developments in mobile and cellular communication.
5G technology.
Antenna designs for new technologies.
Small cell technology.
Evolution of broadband communication and architectural aspects.

NITTTR sponsored STC on “System Design with Smart Controllers”

27-31 May, 2019

Major topics to be covered during this STC include:
Designing aspects of embedded systems.
Application specific ICs.
Trends in system designing using smart controllers.
Research issues in system designing.

NITTTR sponsored STC on “Digital System Design”

28 January-1 February, 2019

Major topics to be covered during this STC include:
Focus on Digital System Designs.
Review of digital circuits.
XC 4000e series of FPGA.
Simulation and Synthesis of circuits using VHDL.

NITTTR sponsored STC on “Power Electronics”

26-30 November, 2018

Major topics to be covered during this STC include:
Basic understanding of Power Electronics.
Role of renewable energy in power electronics.
Design and simulation techniques in Power Electronics.
Role of AI in Power Electronics applications.

NITTTR sponsored STC on “Electronic Devices and Circuits”

24-28 September, 2018

Major topics to be covered during this STC include:
Recent developments in Electronic Devices.
Power semiconductor devices.
Electronic Circuit Design principles.
Trends in high-performance circuits.

NITTTR sponsored STC on “Green Energy and Technology”

30 July-3 August, 2018

Major topics to be covered during this STC include:
Importance of green energy.
Use of technology for sustainable energy solutions.
Power harvesting techniques.
Role of policies in green energy development.

NITTTR sponsored STC on “Microcontroller Based System Design”

16-20 July, 2018

Major topics to be covered during this STC include:
Microcontroller systems basics.
Advanced applications of microcontrollers.
System-level designs using microcontrollers.

Workshops

Name of FDP/STTP/STC

Date

Details

Technical Workshop on Embedded & IoT Training

02-02-2024

The workshop was organized to cover the following points:
Circuit design and simulation through Tinkercad.
Smart Traffic light (One Way)
Smart Traffic light (Two Way)
Smart Street light System
Ultrasonic-based object detection
Sensors-controlled Relay
How to use NODE MCU
Temperature and humidity detection
IoT Cloud data transmission
Smart Fire Alarm systems

Business Model Canvas (BMC)

02-05-2023

The workshop was organized to cover the following points:
Discuss Business Model Canvas (BMC) as a strategic tool.
Discuss the various elements of BMC.
Learn to summarize and communicate a business idea or concept visually.
Gather insights and a greater understanding of the business venture.

Entrepreneurship Skill, Attitude and Behaviour Development

14-02-2023

The workshop was organized to cover the following points:
Need to become an Entrepreneur.
Why a Startup?
Am I ready to become an Entrepreneur?
My Idea: Tools & Techniques of Idea selection and creation.
INIF (Business Incubator) and its role in nurturing startups.
Assistance from Govt. if you are planning to start your own venture.

Entrepreneurship as Career Option

04-01-2023

The workshop was organized to cover the following points:
Need to become an entrepreneur.
Why start a Startup?
Am I ready to become an entrepreneur?
My Idea: Tools & Techniques of Idea selection and creation.
My First Document: Pitch Deck.
INIF (Business Incubator) and its role in nurturing startups.
Assistance from Govt. if you are planning to start your own venture.

Workshop on Machine Learning

5/2/2022

The workshop was organised to cover following points:
To develop an insight into the evaluation procedures of NBA.
To address the overall enquiries generated in Criteria 3-10 of NBA.

Workshop on Outcome Based Education (OBE) on the topic "Evaluation Procedure for NBA Criteria

4/14/2022

The workshop was organised to cover following points:
To upgrade the skills and knowledge of the students in Antenna Design & Fabrication using HFSS tool.
Demonstration of Ansys 3D electromagnetic simulation software used to design, simulate and validate the performance of antennas and RF microwave components.

Workshop on Outcome Based Education (OBE) on the topic Attainment Calculations using Ion CUDOS

4/9/2022

The workshop was organised to cover following points:
Direct & Indirect CO Attainment Calculations.
Direct & Indirect PO & PSO Attainment Calculations.

Workshop on Outcome Based Education (OBE) on the topic Overview, Importance & Relevance to OBE

4/2/2022

The workshop was organised to cover following points:
Insight to Criterion-1 & Criterion-2 of NBA.

Advanced Application of Antenna Design & Fabrication Using HFSS

11-Jan-2021

The workshop was organised to cover following points:
To upgrade the skills and knowledge of the students in Antenna Design & Fabrication using HFSS tool.
Demonstration of Ansys 3D electromagnetic simulation software used to design, simulate and validate the performance of antennas and RF microwave components.

PCB Machine

07-Dec-2020

The workshop was organised to cover following points:
To understand the basic steps to fabricate a microstrip antenna or any other circuit on PCB.

Computational Simulation tool (RF & Microwave)

04-Dec-2020

The workshop was organised to cover following points:
RF Passive Component Design.
RF Passive Network Design including Combiners, Splitters, Filters, Circulators, Duplexers, Couplers.
RF Component and System Modeling and Simulation.
Antenna Fabrication, Modeling and Simulation.
Non-reciprocal Device Development.

Vector Network Analyser (VNA)

2-Dec-2020

The workshop was organised to cover following points:
Working of Vector Network Analyser (VNA).
To understand S-parameters and other basic parameters such as Radiation Pattern, Efficiency and Gain of microstrip antenna as well as other RF components.
Analysis of different parameters of devices under test like microstrip antenna using Vector Network Analyser.

Entrepreneurship Awareness Camp

2 to 4 Mar, 2020

The workshop was organised to cover following topics:
Historical background - Indian values vis-a-vis Entrepreneurship and the present scenario.
Identification of opportunities for entrepreneurs.
Mechanism of product selection and technology assistance from R&D labs and others on choice of technology etc.

Machine Learning

25-Jan-2020

The workshop was organised under Requiza Club & IEI Society to cover following points:
To learn the basics of machine learning, including supervised and unsupervised learning, choosing the right algorithm, and practical examples.
To explore hard and soft clustering algorithms and learn about common dimensionality-reduction techniques for improving model performance.

Analog & Digital IC Design Flow

16 Jan, 2020 - 17 Jan, 2020

The workshop was organised to fulfil the following outcomes:
To recognize the role of Indian Semiconductor Industry in the global space.
To understand the segmentation of the VLSI industry in India.
Application of Analog and Digital IC Design Flow, Full-custom & Semi-custom flow.
Utilization of industry-standard Electronic Design Automation tools for teaching and research activities.

National Instruments, NI-CRIO

05-Nov-2019

The workshop was organised to cover following points:
Basics of Networking.
Scope of networking.
Working of Wireless Sensor Networks.
Creating and connecting Gateway in the network.
Configuring programmable nodes.

Guest Lectures

Experts

Topic

Date

Mr. Aninda Bose, Springer Nature Group, London (U.K)

Research Publication

12-04-2024

Ms. Apurva Gupta (Silicon Engineer, Microsoft & Gold Medalist, IIIT Delhi) & Mr. Rajat Kumar Singh (Founder & CEO at VLSI for All)

Campus to Corporate in VLSI Design

04-04-2024

Mr. Saurabh Srivastava, Senior Design Engineer, NXP Semiconductors

A Pathway for Preparing Budding Engineers to Unlock Corporate World Options

21-03-2024

Reema Mediratta, Head, Innovation-Technology Transfer Office, FITT, IIT Delhi

Significance of IPR and its transition

07-03-2024

Devanshi Chauhan (Secured Rank-06 in AKTU)

Strategic Preparation to Excel in Academics

02-03-2024

Mr. Pankaj Kushwaha, Technical Team Lead, NEC Technologies

A Pathway for Preparing Budding Engineers to Unlock Corporate World Options || Readiness Programme for NEC Technologies

29-09-2023

Mr. Mridul Verma (Digital Physical Design Engineer at NXP Semiconductors, Noida)

ASIC Design Flow

09-02-2024

Ms. Bhumika Sharma, Advanced Application Engineering Associate, Accenture India

A pathway for preparing budding Engineers to unlock corporate world options

03-09-2023

Ms. Deepali Maheshwari, Yoga Guru, Positive Transformation

Role of Yoga and Diet in Our Life

27-05-2023

Mr. Saurav Kumar, General Manager (In Charge), Technology Business Incubator- KIET

Entrepreneurial Ecosystem & Opportunity

22-02-2023

Ms. Neha Goyal, Director, Patents, Unipatrde Consultants LLP

Role of IPR in academia and research

21-02-2023

Mr. Abhishek Pratap Singh, Design Manager, Truechip, Noida

Future of semiconductor in India

04/11/2022

Mr. Subramanian Shankar, Country Lead, University Recruitment, Silicon Labs

Equipping for the New Corporate

11/10/2022

Ms. Neha Goyal, Director, Founder and Mentor UniPatrde Consultants L.L.P

Basics of Intellectual Property Rights

06/10/2022

Prof. (Dr.) Brajesh Kr. Kaushik, IIT - Roorkee

Spintronics - Perspectives and Challenges

16/09/2022

Dr. Raghvendra Kumar Chaudhary, Associate Professor, IIT Kanpur

Metamaterial Antenna and MIMO cognitive radio systems for 5G Applications

02/09/2022

Dr. Maheshkumar H. Kolekar, Associate Professor, Electrical Engineering Department, IIT Patna

Deep Learning and Its applications

16/06/2022

Dr. Bharat Gupta, Associate Professor, Electronics And Communication Department, NIT Patna

Trends in Communication from 1G to 5G and its beyond: An overview

10/6/2022

Prof. Manoj Kumar Meshram, Head- ECE, Electronics And Communication Department, IIT BHU

Recent Advances in Planar Antennas

27/05/2022

Dr. Manisha Bharti, Head- ECE, Electronics And Communication Department, NIT Delhi

Advances in Optical Communication Systems

19/05/2022

Mr. Tushar Kumar Srivastava, Senior Patent Attorney, Director Blue IP, IIT Patna

Passionate Journey of IPR for Institutions & Corporate

23/08/2021

Dr. R.P. Pushkar, Senior Lecturer & Chief Co-ordinator (Hon.) of ASPEUS, Prayagraj

Acupressure & color therapy to boost

18/06/2021

Mr. Rohit Phutela, Manager Marketing & Technical Services, Automation Engineers A.B Pvt. Ltd

A Revolution in Manufacturing – Industrial Automation

18/03/2021

Ms. Aakriti Goel, Low Power GPU implementation Engineer, Qualcomm India Pvt. Ltd.

Low Power Design Techniques in VLSI

13/02/2021

Ms. Shivangi Sharma, Engineer-Data Science, AVL India Pvt. Ltd.

Online Alumni Interaction Program on "Career Opportunities in Artificial Intelligence & Data"

15/01/2021

Mr. Shivam Rai, Analyst, Global Logic Tech. India Pvt. Ltd., Gurgaon

Online Alumni Interaction Program on “Industry Insights & Career Opportunities"

24/12/2020

Mr. Sunil Pandey, Senior Analog Design Engineer, Intel, Bangalore

Design & Analysis of Low Noise Amplifier (LNA) for Ultra Wideband Applications

11/07/2020

Ms. Geetika Singh, A & MS Layout Engineer, Synopsys

CMOS Standard Cell Design and PPA Concept

10/07/2020

Ms. Golda Malhotra, Country Manager, FRENCH EMBASSY IN INDIA, NPLUSI Engineering Consortium

Study Abroad- Global Opportunities after Engineering

08/07/2020

Mr. Ankur Sharan, Director, 4Track Learning

Mr. Sharad Maurya, Director, Career Voyage Consulting

08/07/2020

Ms. Aayushi Jain, Senior Consultant, Adobe Systems India

Business Intelligence and Analytics

07/07/2020

Mr. Piyush Ranjan, Research Scholar, Indian Institute of Science, Bangalore

Research Opportunities after GATE in India's Premiere Institutions

06/07/2020

Mr. Rajat Bansal, Design Engineer, KeenHeads Technologies Pvt. Ltd

Design to Manufacturing in VLSI

05/07/2020

Ms. Niyoti Saxena, Data Engineer, Bizmetric

Journey from College to Corporate

04/07/2020

Mr. Ravi Kumar Mathur, Assistant Director General, National Telecommunication Institute for Policy Research Innovation & Training (NTIPRIT), Ministry of Communications, Ghaziabad

Introduction to Blockchain

03/07/2020

Mr. Shashank Joshi, Technical Architect, Technical Excellence Group

Prediction using Graph Modelling

02/07/2020

Rahul Pathak, Expert, Artificial Intelligence & Deep Learning

Artificial Intelligence

01/07/2020

Mr. Utkarsh Arora, Senior Design Engineer, World Wide IP development, Global Foundaries

How to make career in VLSI?

30/06/2020

Industry Connects


MOU's

Organisation with which MoU is signed

Year of signing MoU

Duration

List the actual activities under each MOU year-wise

Number of students/teachers participated under MoUs

JKSD INFOTECH PVT LTD

2023-24

3 years (27-05-2024 to 27-05-2027)

2 Workshops conducted

Faculty & Students of ABES EC

NEXTUP ROBOTICS PVT LIMITED

2023-24

3 years (22-05-2024 to 22-05-2027)

2 Workshops conducted

Faculty & Students of ABES EC

FITT i-TTO IITD

2022-23

Lifetime (Signed on: 04-05-2023)

3 Guest lectures conducted

Faculty & Students

OPTICA

2022-23

Indefinite (Signed on: 16-01-2023)

1 week event under National Engineers' Week

Faculty & Students

EICT IITG

2022-23

5 years (12-10-2022 to 12-10-2027)

Collaborated in IEEE ICSEIET 2023 conference

Faculty & Students of ABES EC

UNICONVERGE TECHNOLOGIES PVT LTD

2020-21

Lifetime (Signed on 30-04-2020)

2 Workshops conducted

Faculty & Students of ABES EC

Phytec Embedded Pvt Limited

1905-06

Autorenewable (Signed on 14-07-1905)

Workshop

Faculty & Students of ABES EC

Envirozone Instruments & Equipments Private Limited

2021-22

Autorenewable (Signed on 13-08-2021)

Guest lecture

Faculty & Students of ABES EC

True Chip

30-04-2020

Autorenewable

Internship, Training, consultancy

Faculty & Students of ABES EC

Automation Engineers.A.B.PVT.Ltd

23-01-2020

Autorenewable

Guest Lecture on "Modern Trends in Industrial automation & its applications"

Faculty & Students of ABES EC

RSA Power Pvt. Ltd.

11-08-2018

Autorenewable

Technical Staff Development Programme (2 days - EJB/JSP for solar power inverters)

Faculty & Students of ABES EC

The Tag Factory, Noida

29-12-2017

Autorenewable

Executed Projects: Students and faculty worked on a project titled

  • a. Attendance management using RF ID
  • b. Temperature data logger using RF ID

Faculty & Students of ABES EC

JKSD INFOTECH PVT LTD

Year of signing MoU: 2023-24

Duration: 3 years (27-05-2024 to 27-05-2027)

Activities: 2 Workshops conducted

Participants: Faculty & Students of ABES EC

NEXTUP ROBOTICS PVT LIMITED

Year of signing MoU: 2023-24

Duration: 3 years (22-05-2024 to 22-05-2027)

Activities: 2 Workshops conducted

Participants: Faculty & Students of ABES EC

FITT i-TTO IITD

Year of signing MoU: 2022-23

Duration: Lifetime (Signed on: 04-05-2023)

Activities: 3 Guest lectures conducted

Participants: Faculty & Students

OPTICA

Year of signing MoU: 2022-23

Duration: Indefinite (Signed on: 16-01-2023)

Activities: 1-week event under National Engineers' Week

Participants: Faculty & Students

EICT IITG

Year of signing MoU: 2022-23

Duration: 5 years (12-10-2022 to 12-10-2027)

Activities: Collaborated in IEEE ICSEIET 2023 conference

Participants: Faculty & Students of ABES EC

UNICONVERGE TECHNOLOGIES PVT LTD

Year of signing MoU: 2020-21

Duration: Lifetime (Signed on 30-04-2020)

Activities: 2 Workshops conducted

Participants: Faculty & Students of ABES EC

Phytec Embedded Pvt Limited

Year of signing MoU: 1905

Duration: Autorenewable

Activities: Workshop

Participants: Faculty & Students of ABES EC

Envirozone Instruments & Equipments Private Limited

Year of signing MoU: 2021

Duration: Autorenewable

Activities: Guest lecture

Participants: Faculty & Students of ABES EC

True Chip

Year of signing MoU: 2020

Duration: Autorenewable

Activities: Training

Participants: Faculty & Students of ABES EC

Automation Engineers.A.B.PVT.Ltd

Year of signing MoU: 2020

Duration: Autorenewable

Activities: Guest Lecture on "Modern Trends in Industrial Automation & its Applications"

Participants: Faculty & Students of ABES EC

RSA Power Pvt. Ltd.

Year of signing MoU: 2018

Duration: Autorenewable

Activities: Technical Staff Development Programme (2 days - EJB/JSP for solar power inverters)

Participants: Faculty & Students of ABES EC

The Tag Factory, Noida

Year of signing MoU: 2017

Duration: Autorenewable

Activities: Executed Projects:

  • Attendance management using RFID
  • Temperature data logger using RFID

Participants: Faculty & Students of ABES EC

Purpose of MOUs
The primary purpose of MOU is to bridge the gap between Industry and Academia. Furthermore, MOUs minimize the gap between learning and carrier opportunities. The industry offers a pathway to novel technological trends and opportunities. At the same time, industry-academic interaction plays a vital role in the placements and carrier growth for the students.
Keeping in view Industry 4.0 requirements, the Department of Electronics & Communication Engineering at ABES has signed MoUs with a number of prominent Industries including JKSD Infotech Pvt. Ltd. NEXTUP Robotics Pvt. Ltd. FITT i-TTO IIT Delhi, EICT IIT Guwahati, Uniconverge Technologies Pvt. Ltd. for industry-based consultancy and projects. This has further provided an opportunity to fetch potential consultancy projects and deliver after successful execution.
Trainings

Training Name

Start Date

30-06-2022

2021-22

Training course on Design & Verification using Verilog (for 3rd year)

08-04-2022

30-06-2022

Training course on Schematic and Layout Design of VLSI Circuits (for 3rd year)

08-04-2022

30-06-2022

Training course on Embedded Systems & IoT (for 3rd year)

08-04-2022

30-06-2022

Training course on Bio-Medical Signal Processing and Image Processing using NI-LabVIEW (for 3rd year)

08-04-2022

30-06-2022

Training course on Industrial Automation using PLCs (for 3rd year)

08-04-2022

30-06-2022

Training course on RF & Microwave Devices (for 3rd year)

08-04-2022

30-06-2022

2020-21

Training course on Design & Verification using Verilog (for 3rd year)

24-08-2021

10-09-2021

Training course on Schematic and Layout Design of VLSI Circuits (for 3rd year)

24-08-2021

10-09-2021

Training course on Embedded Systems & IoT (for 3rd year)

24-08-2021

10-09-2021

Training course on Bio-Medical Signal Processing and Image Processing using NI-LabVIEW (for 3rd year)

24-08-2021

10-09-2021

Training course on Industrial Automation using PLCs (for 3rd year)

24-08-2021

10-09-2021

Training course on Optical, Microwave & Antenna Design (for 3rd year)

24-08-2021

10-09-2021

2019-20

Training course on VLSI Design & Technology (for 2nd & 3rd year)

5/18/2020

7/4/2020

Training course on Embedded Systems & IoT (for 2nd & 3rd year)

5/18/2020

7/4/2020

Training course on Signal Processing using NI-LabVIEW (for 2nd & 3rd year)

5/18/2020

7/4/2020

Training course on Industrial Automation-PLCs & Electro pneumatics (for 2nd & 3rd year)

5/18/2020

7/4/2020

Training course on Microwave & Antenna Design (for 2nd & 3rd year)

5/18/2020

7/4/2020

Training course on VLSI Design & Technology (for 2nd & 3rd year)

5/18/2020

7/4/2020

Training course on Embedded Systems & IoT (for 2nd & 3rd year)

5/18/2020

7/4/2020

Training course on Signal Processing using NI-LabVIEW (for 2nd & 3rd year)

5/18/2020

7/4/2020

Training course on Industrial Automation-PLCs & Electro pneumatics (for 2nd & 3rd year)

5/18/2020

7/4/2020

Training course on RF & Microwave Devices (for 3rd year)

5/18/2020

7/4/2020

Introduction to Analog & Digital Electronics (for 1st year)

5/18/2020

7/4/2020

2018-19

PC BASED AUTOMATION USING SIGNAL PROCESSING & LabVIEW PLATFORM

6/26/2019

8/20/2019

INDUSTRIAL AUTOMATION

1/10/2019

3/3/2019

INDUSTRIAL AUTOMATION

6/26/2019

8/8/2019

PROJECT BASED EMBEDDED SYSTEMS - BASIC AVR TRAINING PROGRAM

6/26/2019

8/8/2019

VLSI FRONT END TRAINING

6/28/2019

7/19/2019

VLSI BACK END TRAINING

6/28/2019

7/19/2019

2017-18

Digital and Analog based Back End Training Program

6/13/2018

7/17/2018

PC Based Automation using NI LabVIEW and Signal Processing Platform

6/11/2018

6/29/2018

Industrial Automation using PLC, HMI & Drives

6/6/2018

6/30/2018

PCB & Circuit Design

6/4/2018

6/20/2018

Embedded C Using AVR

6/6/2018

6/28/2018

Robotronics

8/2/2018

8/16/2018

2016-17

Industrial training for B. Tech. 2nd year students with front end tools (VHDL)

6/12/2017

7/10/2017

Industrial training for B. Tech. 3rd year students with back end tools (Virtuoso)

6/12/2017

7/10/2017

PC Based Automation using NI LabVIEW and Signal Processing Platform

6/7/2017

6/30/2017

Analog and Digital Electronics

B1-20/06/2016

B1-07/01/2017

Analog and Digital Electronics

B2-28/01/2017

B2-14/07/2017

Industrial Automation using PLC, HMI & Drives

B1-2/01/2017

B1-22/03/2017

Industrial Automation using PLC, HMI & Drives

B2-6/06/2017

B2-23/06/2017

Basic AVR

12/27/2016

1/4/2017

Project based Embedded System Using AVR

7/6/2017

6/30/2017

Industrial Visit

Industrial Visits

Akshat Autoline Private Ltd on 27 December, 2024

Deki Electronics, Noida on 18 December, 2024

VVDN Technologies Pvt Ltd, Gurugram on 02 February, 2024

Deki Electronics, Noida on 14 December, 2023

Akshat Autoline Private Ltd on 03 November, 2023

CFEES, cluster of DRDO on 22 March, 2023

Bisleri International Pvt Ltd on 21 March, 2023

Akshat Autoline Private Ltd on 30 September, 2022

Deki Electronics, Noida on 28 September, 2022

CSIR National Laboratory on New Delhi 22 April, 2022

Automation Engineers AEAB Pvt. Ltd, Noida on 04 March, 2020

Deki Electronics Pvt Ltd, Noida on 07/02/2020

DRDO, New Delhi on 18.09.19

Bisleri International Private Limited Sahibabad on 14.8.19

Inter University Accelerator Centre New Delhi on 9/08/2019

IETF-2019 organized by Confederation of Indian Industries (CII) at Pragati Maidan, New Delhi, on 5th February, 2019

Sofcon India Pvt. Ltd., Noida, on 31 January, 2019

Sofcon India Pvt. Ltd., Noida, on 30 January, 2019

Automation Engineer Pvt. Ltd, Noida, on 27th Sep., 2018

Advanced Level Telecom Training Centre, Ghaziabad, on 7th April, 2018

Automation Engineer Pvt. Ltd, Noida, on 4th – 6th April, 2018

DEKI Electronics, Noida, on 23th Nov, 2017

Huawei, Gurgaon, on 23rd and 24th March, 2017

DEKI Electronics, Noida, on 21st, 22nd and 23rd Feb, 2017

DEKI Electronics, Noida, 9th March, 2016

Automation Engineering AB (P) Ltd.” Phase – II, Noida, on 18th Aug, 2015

Frequently Asked Questions


1. What is the inception year of department?

The Department of ECE was incepted in the year 2000.

2. How many batches passed since inception?

No. Of batches passed out-21

3. What is the number of students graduated from department?

No. Of students passed out-4500 approx

4. Whether there is any “Award Policy” for top performers?

Yes, there is an award policy for top performers (attached in the college repository)

5. What areas of job can individual opt for after graduating from this branch?

There are six broad areas from which an individual can opt for job:
1. IT Field
2. Electronic Designing Field
3. Devices & Circuit Field
4. VLSI Field
5. Sales & Service Field
6. R & D, Govt. & Academic Field

6. What are the interdisciplinary areas where I can build my career after graduating from ECE Branch?
There are areas which are interdisciplinary where student can explore their future after graduating from ECE like:
1. IT Field
2. Mechatronics
3. Control Engg.
4. Nanotechnology
5. Data Science
6. Machine Learning
7. Artificial Intelligence
8. IoT etc.
7. How department helps a student to become “Industry Ready”?

The department initiates the process of making students “Industry Ready” from 2nd year onwards:
1. From 2nd year :- The technical domain of the students is identified and as per their interest they are provided training and guidance. They are motivated for pursuing research and work in live industry projects. They are further mentored for publications and patents in upcoming semesters. In academics the students are classified in slow and fast learners. The slow learners are provided extra classes to make them comparable with fast learners. They are provided with Concept booster classes by senior faculty members.

2. From 3rd year:- The focus is on training and is more channelized.At this stage, a training tracker is introduced for tracking their progress. All the students have to publish technical papers in conferences or journals. The students are provided Concept booster classes by senior faculty members to enhance their knowledge.Simultaneously, the students are provided placement related guidance. Exhaustive Mock HR and Technical Interview sessions are conducted rigorously.

3. From 4th year :- The primary emphasis is on the placement of students. In this direction,the placement coordinators keep a constant track of each and every student’s placement activity. Before the placement drive, the department organizes presentations based on company’s profile, purpose of recruitment, expected domain and job profile along with the briefing of placement process. Discussion on the expected HR & Technical interview questions is held. A Placement tracker is maintained that monitors and records the details of the interview process which is analyzed further and effective steps are taken to enhance the skills of the students for the upcoming interviews.

8. What is average package in latest completed placement year?

The average package in latest completed placement year is Rs.4.25 Lacs.

9. What is highest package in latest completed placement year?

Highest package in the placement in previous years is 26 lacs.

10. Whether there is an established system mentor-mentee program at departmental level?

Yes, there is an established system mentor – mentee program at departmental level where 20 students are allocated to a faculty member. The faculty remains their mentor till they graduate from the college. The mentor looks after each and every activity related to academics, discipline, training, placement etc. The parents are informed about their wards progress through the mentors. The students are counselled on regular basis in every area where they need guidance offered by senior faculty members and HOD of the department.

11. How are the projects of final year selected by students?

The selection of final-year projects typically depends on a blend of institutional guidelines, individual interests, career goals, and available resources. Faculty members often suggest project topics aligned with their areas of expertise. Students can either select from these predefined topics or propose their own ideas for approval. They frequently form teams with complementary skill sets, such as expertise in coding, documentation, or hardware, to efficiently manage various aspects of the project.

12. What are the policies to motivate student to attend seminar/conferences or to publish research papers?

The students are motivated to attend seminars/ conferences where they can publish research papers. The students in final year are required to publish two papers related to their project. For this purpose,the students get financial support from the college.

13. What is the grievance redressal system at departmental level?

In order to address student related issues and grievances (pertaining to academics & individual problems) department has constituted a Department Grievance Cell comprising of HOD and senior faculty members. The student can register his/her grievance in the above-mentioned cell. The concerned students are called for a meeting with the grievance cell and the matter is investigated. The concerned student is counselled by the team in order to resolve the matter depending upon the intensity of the problem. The grievance cell tends to resolve the matter at the earliest by means of prompt investigation followed by psychological counselling and regular follow ups.